Advertisement
Quick Links
iFLAT INSTALLATION GUIDE
PRODUCT FEATURES:
iFlat is a functional LED lighting solution for exterior lighting applications. By using the same lighting
platform and incorporating a new and unique BSISQ® LED Module; the luminaire achieves the
required illumination levels and distribution in pedestrian, site, roadway environments.
Designed to last in extremely harsh environments.
RECOMMENDATIONS FOR THE USER:
1)Before the installation, make sure that there is no voltage.
2)Do not touch the fitting when it is working on / switched on
3)Do not look at the fitting directly or from a short distance.
4)Disconnect / switch off the fitting before changing the lamps
NOTES:
-Technical amendments are reserved.
-CE – Conformity mark
-The manufacturer is then discharged from liability when damage is caused by improper
use or installation.
-Clean luminaire regularly with solvent-free cleansers from dirt and deposits. Do not use
high pressure cleaners.
Headquarters : Konutkent Mah. 3029 Cad. No:3/91 06810 Çankaya Ankara/TURKEY Phone : +90 312 472 42 50 Fax : +90 312 502 74 75 Email : info@bsilighting.com
1
Advertisement
Related Manuals for BSi iFLAT
Summary of Contents for BSi iFLAT
- Page 1 INSTALLATION GUIDE PRODUCT FEATURES: iFlat is a functional LED lighting solution for exterior lighting applications. By using the same lighting platform and incorporating a new and unique BSISQ® LED Module; the luminaire achieves the required illumination levels and distribution in pedestrian, site, roadway environments.
- Page 2 INSTALLATION GUIDE 1) The anchor bolts are mounted. *Do not remove the screvs on the anchorage. Rod should be screwed to the collar 25mm max 25mm Anchor Bolt 2) - The prepared anchor is embedded in the concrete and leveled.
- Page 3 INSTALLATION GUIDE 3-a) Mounting to Square Pole; - The juncture is screwed to the pole by passing the energy cable inside. - Luminaire cable and pole cable connected to each other. The luminaire is adjusted to desired position and the juncture is tightened.
- Page 4 INSTALLATION GUIDE 3-b) Mounting to Cylindirical pole; - The power cable is passed through the luminaire and the adapter is tightened to the pole by the setscrews on the side. - Electrical Connection is done. - Fit the luminaire to the adapter and tighten the setscrews.
- Page 5 INSTALLATION GUIDE 4) - Temporary screws on the anchor are removed. - The mast is placed on the anchor and screwed into the anchor with new inox screws. - Electrical connection is done. - The fuse cover is re-mounted.