Download Print this page

California Sunbounce SUN-SWATTER PRO Operating Instructions

Advertisement

Quick Links

5. Stecken Sie den Querbügel auf ein T-Verbindungsstück am Längsrohr.
Aufbauanleitung
6. Halten Sie den Querbügel fest und ziehen Sie das Längsrohr in Hüfthöhe zu sich heran.
Operating Instructions
Stecken Sie das T-Verbindungsstücke in den Querbügel.
7. - 8. Verbinden Sie den schwarten Spanngurt und straffen Sie ihn leicht.
SUN-SWATTER PRO
9. Für die perfekte Verbindung zum BOOM-STICK oder Stativ empfehlen wir den SWATTY
GRIP-HEAD. Befestigen Sie den GRIP-HEAD mittig am Querbügel
und ziehen Sie die Schraube
nicht ganz fest. Wichtig: Der Querbügel soll sich im GRIP-HEAD bewegen lassen.
10. Stecken Sie nun den BOOM-STICK in den SWATTY GRIP-HEAD und ziehen Sie die
Schraubefest.
11. - 12. Schlingen Sie den kurzen gelben Gurt um den schwarzen Spanngurt und zweimal um
das vorletzte Glied des BOOM-STICKS unterhalb der Schraube.
13. - 14. Sie können nun über die Länge des „letzten Gliedes" des BOOM-STICKS den
Anstellwinkel des SUN-SWATTER regulieren, also ganz einfach steiler oder flacher stellen.
Operating Instructions
1. All components except the boom stick are in the bag. There are two long frame poles, one
crossbar and one screen.
2. Assembly starts by putting the two sections of frame pole together.
3. Slide the pole into the sleeve along the screen.
4. Now pull the closed corners of the pockets over the pole ends such that the screen is taut.
Repeat with the other side of the screen.
5. Next insert the crossbar in the T-connector. Make sure that at connection point you insert
the lock pins.
6. - 8. Now you tighten the black strap wich pulls the frame tight.
9. The SWATTY GRIP-HEAD is placed on to the crossbar and tightened NOT all the way. Very
important, the crossbar should still be able to move in the grip head.
10. Connect the boom stick to the SWATTY GRIP-HEAD.
11.- 12. Sling the yellow strap around the black strap an two times around the boom stick just
below the first knuckle.
13. - 14. The SUN-SWATTER can be moved into many different positions just by loosen the first
knuckle of the boom stick and pushing up using the grip head as a fulcrum point.
SUNBOUNCE GmbH · Siems Twieten 4 · 21376 Garlstorf · Germany
Telefon: +49 (0) 4172 - 9878787 · Telefax: +49 (0) 4172 - 9878767
E-Mail: info@sunbounce.com · Internet: www.sunbounce.com
© 2009 CALIFORNIA SUNBOUNCE. All rights reserved.

Advertisement

loading

Summary of Contents for California Sunbounce SUN-SWATTER PRO

  • Page 1 SUNBOUNCE GmbH · Siems Twieten 4 · 21376 Garlstorf · Germany Telefon: +49 (0) 4172 - 9878787 · Telefax: +49 (0) 4172 - 9878767 E-Mail: info@sunbounce.com · Internet: www.sunbounce.com © 2009 CALIFORNIA SUNBOUNCE. All rights reserved.
  • Page 2 Bedienungsanleitung 1. Alle Einzelteile des SUN-SWATTER RO befinden sich im Tragebeutel. Es sind zwei Längsrohre, ein Querbügel und eine Bespannung. 2. Die Längsrohre bestehen aus jeweils zwei Teilen und müssen zuerst zusammengesteckt werden. 3. Fädeln Sie das Längsrohr in die angesetzten Taschen der Bespannung ein. 4.