Related Manuals for Naxa NE-981
Summary of Contents for Naxa NE-981
- Page 1 2-In-1 Bluetooth® Earbud & Car Charger NE-981 Instruction Manual Please read before operating product...
-
Page 2: Table Of Contents
Table of Contents Introduction..........3 Package Contents........3 Safety Instructions........4 Basic Operation........6 How to Use..........7 Specifications.........13 Support..........15... -
Page 3: Introduction
Congratulations, and thank you for choosing Naxa’s 2-In-1 Bluetooth® Earbud and Car Charger. This you should familiarize yourself with the Bluetooth func- tionality of your mobile phone or other external devices before using the Naxa 2-In-1 Bluetooth® Earbud and Car Charger. Package Contents • NE-981 •... -
Page 4: Safety Instructions
Safety Instructions Before using the device, read the operating instructions very carefully. Keep this operation manual for later reference. 1. Do not use an appliance for any purpose other than its intended use. 2. Warning: Do not expose the appliance to extreme temperatures, to strong temperature fluctuations, direct sunlight or humidity. - Page 5 9. Batteries (battery pack or batteries installed) shall not be exposed to excessive heat such as sunshine, fire or the like. 10. The battery must be removed from the appliance before it being disposed of properly. 11. Only remove the rechargeable battery when you intend to dispose of the appliance.
-
Page 6: Basic Operation
Basic Operation 1. Touch earphones for 8 seconds to shutdown manually. 2. Earphones will shutdown automatically in 3 minutes after disconnected with devices. NOTE: The battery status of earphones is visible on connected devices, when it’s running out of power, the earphones will remind you with a voice prompt “Low battery”, and red indicator will flash every 30s, please recharge in time. -
Page 7: How To Use
“Power on” and “ Pairing”. 2. Enable the bluetooth pairing mode on your phone device. Tap on “NAXA NE-981” to connect. 3. Earphones will response with a voice prompt “Con- 4. Earphones will respond with a voice prompt “Discon- 3 minutes later automatically. - Page 8 Playback 1. To play a song through your bluetooth earbuds from your mobile phone, press the multi-function button once. 2. To pause a song, press the multi-function button once again. 3. To play the next song, press the multi-function button 3 times.
- Page 9 Voice Assistant Tap into Siri (iOS): For apple user, talking to your favorite personal assistant is a cinch. Just quick touch earphone for three times to active Siri, without taking your iPhone out of your pocket. Android OS: Make sure your android smart phone support voice assistant, quick touch the earphone for three times to active voice assistant.
-
Page 10: Specifications
Specifications Frequency response range: 20HZ-20KHZ Product impedance: 32Ω±15% Sensitivity: 98±3dB IEC-318 (Artificial ear close-in test) Product size: 43.5x17.2x18.5mm Bluetooth version: 5.0 Transmission range: 2402-2480MHz Supporting agreement: A2DP1.3, HFP1.6, HSP1.2, AVRCP1.5, SPP1.2 Transmission frequency: 2.4GHz band (2.4000- 2.4835GHz) Charging time: 1-2 hours Play time: 2-3 hours Capacity: 30mAh Charging voltage/current: 5V/50mAh... - Page 11 FCC Notice This device complles with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)this device may not cause harmful interference,and (2)this device must accept any interference received, including interference that may cause undesired operation.
-
Page 12: Support
If you have problems with your device, please consult the instructions in this manual. Please also visit us on the web at www.naxa.com to get up to the minute news, alerts, and documentation for your device. For additional assistance, please contact Naxa Technical Support.