Edison PARTY SYSTEM 1220 Instruction Manual

Edison PARTY SYSTEM 1220 Instruction Manual

Home entertainment bluet

Advertisement

PARTY SYSTEM 1220
Home Entertainment Bluetooth
and Karaoke System

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the PARTY SYSTEM 1220 and is the answer not in the manual?

Questions and answers

Michael Gillispie
March 26, 2025

My edison party system 1200 won't power on

User image 67e40799ac572
1 comments:
Mr. Anderson
March 26, 2025

The Edison PARTY SYSTEM 1220 may not power on due to the following reasons:

1. Power Supply Issue – Ensure the unit is connected to a working AC 120V~, 60Hz power source.
2. Damaged Power Cord or Plug – Check if the power cord or plug is damaged. If so, servicing is required.
3. Internal Damage – If the unit was exposed to liquid, dropped, or experienced an electrical issue, it may need professional repair.
4. Standby Mode – Press the power switch or standby button to confirm it is not in standby mode.
5. Fuse or Internal Component Failure – If none of the above resolve the issue, a qualified service technician should inspect the unit.

This answer is automatically generated

Summary of Contents for Edison PARTY SYSTEM 1220

  • Page 1 PARTY SYSTEM 1220 Home Entertainment Bluetooth and Karaoke System...
  • Page 2 WARNING: SHOCK HAZARD - DO NOT OPEN AVIS: RISQUE DE CHOC ÉLECTRIQUE - NE PAS OUVRIR The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
  • Page 3 TO CUSTOMER Thank you for purchasing our products, which displays your superior knowledge of audio equipment. You have made an excellent product choice. Please read all safety and operating instructions in this manual carefully before trying to operate the unit. INSTALLATION &...
  • Page 4 Controls USB JACK 1.POWER SWITCH 2.AC INPUT(120V~,60Hz) 3.(RIGHT) SPEAKER OUTPUT JACK 4.(LEFT) SPEAKER OUTPUT JACK 5.LINE IN AUDIO INPUT 6.AUX AUDIO INPUT 7.FM ANTENNA JACK AUDIO OUTPUT JACK 9.DIGITAL SIGNAL COAXIAL OUTPUT DIGITAL SIGNAL OPTICAL OUTPUT...
  • Page 5 1.MUTE 2.STANDBY 3.USB 4.BT 5.AUX 6.LINE 7.MIC VOLUME- 8.X DRIVE 9.MIC ECHO- 10.LIGHT 11.REPEAT 12.VOLUME- 13.NEXT 14. B.WARD 15.TREBLE+ 16.PREVIOUS 17.TREBLE- 18.NUMBER BUTTON 19.CHANNEL- 20.CHANNEL+ 21.TUNNER- 22.TUNNER+ 23.MEMO 24.AUTO 25.BASS- 26.BASS+ 27. F.WARD 28.VOLUME+ 29.DISCONNECT 30.MIC ECHO+ 31.MIC VOLUME+ 32.FM 33.CD 34.OPEN/COLSE conflicts...
  • Page 6: Connection Diagram

    CONNECTIONS CONNECTION DIAGRAM: Note: - Always unplug the unit when making connections. - Check all connections are firmly fitted. - Check all speakers are connected to their correct designated position.
  • Page 7: Playable Discs And File Format

    PLAYABLE DISCS AND FILE FORMAT Playable discs Play able MP3 and WMA files Use Optical discs bearing the marks below..Optical discs (digital audio) Sampling Bitrate Format frequency (kbps) (kHz) CD-R,CD-RW digital audio discs ..32-320 32/44.1/48 MPEG 1 Audio Layer-3 ●...
  • Page 8: Handling Optical Discs

    HANDLING OPTICAL DISCS ● ● Always handle with care so that the playing surface is Do not wipe with a circular motion; wipe straight not scratched. Do not bend discs. outward from the center. ● To keep the playing surface clean, wipe with a clean, dry cloth.
  • Page 9: Operating The Amplifier

    Operating the Amplifier Normal function 1. Be sure to switch off the power and to connect the outputs to corresponding input jacks. 2. Turn on the power and wait 3-4 seconds untill the speaker functions are connected. 3. Select an audio source by pressing the INPUT key on the front panel or on the remote control to display DISC,AUX,LINE,USB,BT,FM,.
  • Page 10: Usb Application

    ˇ Set your phone or music players to search for Bluetooth devices. ˇ Select Party System 1220 from search results on your phone or music player. ˇ Select OK or Yes to pair this unit with your phone or music player.
  • Page 11: General Requirement

    SPECIFICATION Power Consumption----------------------------------------------------------------- 150W Frequency Response-------------------------------------------------------38Hz~20KHz Max. Input Capability---------------------------------------------------------------500mV Distortion------------------------------------------------------------------------------<0.1% S/N---------------------------------------------------------------------------------------75dB GENERAL REQUIREMENT Power source----------------------------------------------------------- AC 120V~, 60Hz Accessory Operation manual Remote Control FM Antenna ▪The specification presents only as a reference. Weight and size values are approximate. ▪Our product specifications are subject to change without prior notice. ▪The content of this manual has been collated carefully.
  • Page 13 FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

Table of Contents

Save PDF