Hardware Overview; Package Contents; System Requirements - D-Link Nuclias DNH-100 Quick Installation Manual

Before You Begin
This installation guide provides instructions
for installing the DNH-100 on your network.
Additional documentation is also available on
the D-Link support website.
• DNH-100 User Manual: For additional
information and instructions on how to
configure the device using the web user
interface.

Package Contents

This DNH-100 package includes the following
items:
• DNH-100 Nuclias Connect Hub
• Power Cord
• Rack Mount Kit
• Quick Start Guide
• 16 Gb MicroSD Card (Optional
If any of the above items are damaged or
missing, please contact your local D-Link reseller.

System Requirements

• Computers with Windows®, Macintosh®,
or Linux-based operating systems with an
installed Ethernet Adapter
• Internet Explorer 11, Safari 7, Firefox 28,
or Google Chrome 33 and above (for
configuration)
2

Hardware Overview

LED Indicators
1
#
)
1
1
2
(10/100
3
DNH-100 Quick Installation Guide
Figure 1: Front Panel LED
LED Description
Solid Green - The device is powered
on and ready for use, and it is in
standalone mode.
Blinking Green - The device is
booting up.
Power
Solid Orange - The device is
connected to Nuclias server and
single sign-on is available for use.
Solid Red - Device is unable to
boot .
Link
Solid Green - Port is operating at
Speed
10/100 Mbps
Light Off - No Link.
Mbps)
Link
Solid Green - Port is operating at
Speed
1000 Mbps
(1000
Light Off - No Link.
Mbps)
Table 1: LED Description
2 3