Multilaser RE027 User Manual page 144

• Connect Manually - You can configure the Router to make it connect or disconnect manually. After a specified period
of inactivity (Max Idle Time), the Router will disconnect from your Internet connection, and you will not be able to re-
establish your connection automatically as soon as you attempt to access the Internet again. To use this option, check
the radio button. If you want your Internet connection to remain active at all times, enter "0" in the Max Idle Time field.
Otherwise, enter the number of minutes that you wish to have the Internet connecting last unless a new link is requested.
Caution: Sometimes the connection cannot be disconnected although you specify a time to Max Idle Time, because some applications
are visiting the Internet continually in the background.
Click the Save button to save your settings.
6. If your ISP provides PPTP connection, please select PPTP option. And you should enter the following parameters (Figure 4-13):
• User Name/Password - Enter the User Name and Password provided by your ISP. These fields are case-sensitive.
• Dynamic IP/ Static IP - Choose either as you are given by your ISP and enter the ISP's IP address or the domain name.
142
Figure 4-13 PPTP Settings
www.multilaser.com.br