Iceking FF139W Installation And Operating Manual page 9

FIG 2:
0
1 7
3
5
4
CAUTION!
appliance from the mains power supply. The lamp wattage can be
seen on the thermostat.
Follow the below process to replace the lamp:
1. Set the temperature of the thermostat control knob to number "0" to switch
off the appliance.
2. Unplug the appliance to make sure the it is disconnected from the main
power supply.
3. Remove the screw from the lamp cover.
4. Pull the lamp cover out.
5. Unscrew the lamp.
6. Fit new lamp accordingly, then replace the lamp cover and screw.
7. Plug in the appliance and move the temperature control back to the correct
position.
Model：FF139W
1 Temperature control (Thermostat)
2 Thermostat cover
2
1
FIG 3:
Before replacing the lamp, you must disconnect the
9