SAE STONE FIELD 32327-150-71 Instruction Manual

Interior floor lamp

Advertisement

Package contents

(parts are not to scale):
A
B
D
E
Part
Description
A
Fixture body
B
Metal base
C
Clump weight
D
Hexagon bolt M10x25mm
E
Tooth washer
F
Protection pad

Light source

230V E27 1 x 40W

Care and Cleaning

EXTERIOR MAINTENANCE
1. To clean the outside of the fixture, use a dry or slightly dampened clean cloth (use clean water,
never a solvent) to wipe the surface of the fixture.
2. Do not use any cleaners with chemicals, solvents or harsh abrasives. Use only a dry soft cloth to
dust or wipe carefully.
C
F
Quantity
1
1
1
1
1
1
4
INSTRUCTIONS MANUAL
STONE FIELD
INTERIOR FLOOR LAMP
Art Nr. 32327-150-71
www.lampehuset.no
CAUTION:
NO:
Advarsel:
-Bruk kun pærer som anvist etiketten på lampen.
-Slå av lampen før bytting av pære og vent til pæren er avkjølt. Vis forsiktighet ved berøring av lampen når
den er tent. Den kan være varm.
SE:
Varning:
-Använd endast glödlampor enligt anvisningar på lampans etikett.
-Stäng av lampan innan du byter glödlampa och vänta tills lampan har svalnat. Var särskilt försiktig vid
beröring av lampan när den är tänd. Det kan vara varmt.
English:
Warning:
-Only use bulbs as directed on the label on the lamp.
-Turn off the lamp before replacing the bulb and wait until the bulb has cooled. Take special care to touch
the lamp when the lamp is lit. It can be hot.
for Risning
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the STONE FIELD 32327-150-71 and is the answer not in the manual?

Questions and answers

Summary of Contents for SAE STONE FIELD 32327-150-71

  • Page 1 INSTRUCTIONS MANUAL STONE FIELD Package contents (parts are not to scale): for Risning INTERIOR FLOOR LAMP Art Nr. 32327-150-71 Part Description Quantity Fixture body Metal base Clump weight Hexagon bolt M10x25mm Tooth washer Protection pad www.lampehuset.no CAUTION: Light source Advarsel: -Bruk kun pærer som anvist etiketten på...
  • Page 2 Pre-Installation Installation (continued) PLANNING THE INSTALLATION Read all instructions before assembly and installation. Before starting installation of the fixture or removal of a previous fixture, disconnect the power by turning off the circuit breaker or by removing the fuse at the fuse box. To avoid damaging this product, assemble it on a soft, non-abrasive Step 2.

Table of Contents