NAOJ Telescope kit
Viewfinder
Assemble
Instructions
This NAOJ Telescope kit requires
some assembly. Follow these
instructions to complete the
telescope and observe many
kinds of celestial objects.
Precautions
This kit includes a small screwdriver, the only tool necessary for assembly.
●
This kit contains several very small parts. Be careful not to drop or lose any parts.
●
This kit contains optical lenses. Handle the lenses with care to avoid damaging or dirtying
●
them. Scratches or stains on the translucent surfaces of the lenses may interfere with
detailed observations.
If the surfaces do become dirty, clean them gently with a cleaner for cameras or eyeglasses
in order to avoid scratching them.
This kit does NOT contain a tripod for telescope observations. The telescope can be mounted
●
to most still/video camera tripods.
For your own safety and the safety of the telescope, please read the Important Notes at the
●
end of this document before using.
Adult supervision is strongly suggested for children when using the telescope.
●
Warning Indications about Product Liability
Please read this section with your parent or teacher.
WARNING
NEVER observe the Sun with this telescope. Extremely strong sunlight can cause serious
●
damage to your eyes, possibly inducing permanent blindness.
Do NOT put this telescope in direct sunshine. It could accidentally focus the Sun's rays and
●
start a fire.
8
・完成図
・完成図
Body Tube
Viewfinder
Viewfinder
Body Tube
Eyepiece
Viewfinder
Attachment
Eyepiece
Attachment
Draw Tube
Draw Tube
Eyepiece
Eyepiece
This kit does NOT contain
a tripod for telescope
observations.
・イラスト4-1
・イラスト4-1
・イラスト4-2 (2)
Align the screw threads on the
ⓂScrew (long)
outside of the Draw Tube and
the inside of the Body Tube.
・完成図
Viewfinder
Body Tube
Viewfinder
NOTICE
Do NOT walk while using this telescope. You may trip or collide with a person or object
●
resulting in injury.
Draw Tube
Keep this telescope stable. If the telescope falls it may cause injury to people or damage to
●
the telescope itself.
Keep a close eye on children to prevent them from placing the lenses or other small parts
●
・イラスト3-1
into their mouthes.
The included screwdriver has a sharp tip. Handle with care.
●
・イラスト3-1
List of Parts
First of all, check to see that your package contains all the necessary parts.
Ⓐ
Ⓐ
Ⓑ
Viewfinder
Ⓖ
Ⓗ
Ⓘ
Ⓙ
Ⓚ
Ⓖ
Ⓗ
Ⓘ
Ⓙ
Ⓚ
Body Tube :
●
・イラスト4-1
ⒶHalf Tube x2
ⒷLock Ring
Draw Tube :
●
ⒸHalf Tube x2
Ⓜ
Ⓛ
Eyepieces :
●
Ⓜ
Ⓛ
ⒹEyepiece (large)
Ⓝ
Ⓠ
Ⓡ
ⒺEyepiece (small)
ⒻEye Pad x2
ⒼEyepiece Attachment
Ⓠ
Ⓡ
Ⓝ
Optical Parts :
●
ⒽPrimary Lens
・イラスト4-2 (1)
ⒾⒿEyepiece Lens set (large)
ⓀEyepiece Lens set (small) x2
・イラスト4-2 (2)
・イラスト4-2 (1)
Assembly Procedure 1
Preparation of Tube Parts
1
Align the screw threads on the
ⓂScrew (long)
outside of the Draw Tube and
The body parts come pre-assembled, but you will
the inside of the Body Tube.
need to disassemble them to install components
inside.
1. Turn the screw-type Lock RingⒷ to detach.
2. The two halves of the Body TubeⒶ and the Draw
TubeⒸ should separate easily.
ⒽPrimary Lens
ⓂScrew (long)
ⓁTripod Connection Nut
Combine the Draw Tube parts Ⓒ
ⓂScrew (long)
and set them in the Body, with
the wide side inside.
・イラスト3-1
Eyepiece
Attachment
Ⓐ
Eyepiece
Ⓖ
Ⓑ
Ⓒ
Ⓒ
・完成図
Ⓜ
Ⓛ
Body Tube
Viewfinder
Ⓝ
Ⓠ
Ⓟ
Eyepiece
Ⓟ
Attachment
Draw Tube
Eyepiece
Ⓓ
Ⓔ
Ⓕ
Ⓓ
Ⓔ
Ⓕ
Assembly Tools:
●
ⓁTripod Connection Nut
ⓂScrews (long) x4
ⓃScrews (short) x4
ⓅScrewdriver
ⓆGuide Ring for camera
ⓇLuminous Sticker
[Telescope Body]
・イラスト4-1
Combine the Draw Tube parts Ⓒ
ⓂScrew (long)
and set them in the Body, with
the wide side inside.
Detached Lock Ring.
ⓂScrew (long)
・イラスト4-2 (2)
・イラスト5-2 (1)
Align the screw threads on the
Ⓑ
Ⓒ
Ⓗ
Ⓘ
Ⓙ
Ⓚ
Ⓓ
Ⓔ
Ⓕ
・イラスト3-1
Ⓡ
Ⓐ
Ⓑ
・イラスト4-2 (1)
Ⓖ
Ⓗ
Ⓘ
Ⓙ
Ⓚ
Ⓜ
Ⓛ
Ⓝ
Ⓠ
Ⓡ
・イラス
・イラスト5-2 (1)
Convex
Fla
Surface
9
Combine the Draw Tube parts Ⓒ