Advertisement
Quick Links
Advertisement
Summary of Contents for Feli NBM-100
- Page 2 It is easy to dismantle the grinder for wash. The grinder makes almost no ingredient loss on making paste. It requires only 5 minutes cleaning the disassembled parts with a toothbrush and water. It is easy and fast to clean the grinder. Feli grinders help you work efficiently and save your time.
- Page 3 Consume a variety of paste in different ways: eat directly, spread on bread, healthy seasoning for noodles, salad dressing, soup dressing, BBQ sauce, add flavor to ice cream, coffee, milk or soybean milk. You can also make pastries with different paste.
-
Page 4: Front Side
I. Introduction： 1 PETG Hopper 2 Hopper support 3 Front cap securing knob 4 Black front cap 5 Outlet lid 6 Helical rod lock 7 Hopper support securing knobs 8 ON/OFF power indicator 9 ON/OFF power switch 10 Overcurrent protection Front Side button 11 Power plug &... -
Page 5: Operating Procedure
II. Operating Procedure： Step one：Plug in the power cord and switch on the power. The power indicator lightens up and the motor starts functioning. Step two：Pour in gradually roasted nuts into the hopper and the machine starts to grind. Step three：After grinding, switch off the power and plug out the cord. ※To prevent over-heating the motor, please SWITCH OFF the grinder after finishing grinding. - Page 6 III. Adjusting Grinding Fineness： Loosen the front cap securing knob. Remove the black front cap. Push up the helical rod lock and hold it while turning the rotating disc anti-clockwise, with the given wrench, until you hear a “click”. Then, turn the rotating disc anti-clockwise to remove it.
-
Page 7: Cleaning Process
IV. Cleaning Process： Switch off the power. Loosen the front cap securing knob. Remove the black front cap. Push up the helical rod lock and hold it while turning the rotating disc anticlockwise, with the given wrench, until hearing a “click. Then, turn the rotating disc anticlockwise to remove it. - Page 8 V. Notice： 1. The grinder can be customized with the voltage of 110V or 220V, with the frequency of 60/50 Hz. Please use an independent socket instead of a multi-plug socket to avoid un-stabilized voltage, which will cause the motor out of order. . 2.
-
Page 9: Contact Information
Before assembling the grinding disc, they put on a washer according to the thickness of the output butter they wish to make. Do not assemble more than 1 washer at a time VI. Contact Information FELI Technology co., Ltd. Tel：886-2-2903-3330 Fax：886-2-2902-6291 Official URL：www.felilook.com Email：feligroup@feli.com.tw...