Table of Contents
Advertisement
It is recommended you install the appliance in a place where the ambient temperature is between 60ºF and 80ºF
(15º-25ºC). If the ambient temperature is above or below the recommended temperatures, the performance of
the unit may be affected. For example, placing your unit in extremely cold or hot conditions may cause interior
temperatures to fluctuate and not reach the desired temperature.
CONTROL PANEL (TOUCH CONTROL)
1. Temperature range: 2-10°C (36-50℉）
2.
Press
3.
Press
button to turn on or turn off the light.
4.
Press
Fahrenheit to Celsius).
5.
You can set the desired temperature by pressing
6.
The temperature selected will increase/decrease by 1 degree with each press of the buttons.
NOTE:
If the unit is unplugged, or power is lost or turned off, you must wait 3 to 5 minutes before restarting the unit. If you
attempt to restart before this time delay, the unit will not start.
When you use the unit for the first time or restart the unit after it has been shut off for a long time, there could be a few
degrees variance between the temperature you select and the one indicated on the LED readout. This is normal and is
due to the length of the activation time. There should not be a problem once the unit has been running for a few hours.
Use and care
button for 3 seconds to turn on or turn off the appliance.
&
change temperature display from Celsius to Fahrenheit (or from
or
7
MBC145-BL
Advertisement
Table of Contents
