1. SAFETY This HD Receiver has been manufactured to satisfy the international safety standards. Please read the following safety precautions carefully. MAINS SUPPLY:100~240V AC, 50/60Hz OVERLOADING: Do not overload wall outlet, extension cord or adapter as this may result in fire or electric shock.
2. INTRODUCTION Thank you for purchasing the HD Receiver. This HD Receiver is fully compliant with the international DVB standard and thus transmits digital images, sounds, information guides and teletext directly to your TV through the satellite broadcasting. Now you can comfortably see and receive digitally transmitted music, news, movie and sports satellite broadcasts in your office or at your home.
4. Remote Control POWER To switch your receiver on from standby or standby to on. MUTE Used to enable or disable the audio NUMERIC KEYS Used to select channels or enter programming parameters TV / RADIO Receiver switches between TV and Radio mode. (ZOOM) Press key select zoom times, from X1 to X16.
5. Front panel Remote Sensor: Detects infrared signal from remote control unit. POWER Indicator: Lit whilst the receiver is powered on and at standby mode. Signal Indicator: When received signal is strong, the signal indicator is lit. USB: USB 2.0 Host, connect to USB hard disk, or flash disk (on the right side of the receiver). Display: (LED type) Indicates operating status of receiver Buttons: (Standby, CH-, CH+) to operator the receiver.
8.5 Number 8. Basic Operations In full screen, use number key and press [OK] on the Remote Control Unit to change channel. Turn on STB external 5V adapter First, connect to an to turn on 8.6 Mute the unit. 1 Press [MUTE] key to mute the sound and the When the STB is first used, there will play the first screen will show up mute OSD.
Q: Why the screen displays “No Favorite Channel”, after pressing [FAV] key? A: It is because that you haven’t set any channels as “favorite channel”. Please refer to Favorite 8.10 Audio 1 In full screen, press [AUDIO] key can open the “Audio”...
4 Press [Yellow] key you can change the current 5 In EPG menu, when you select one event by high channel’s property, such as FAV/ Lock/ Skip/ light item, you can set this event to record timer list Delete/ Rename. directly by press [REC] button.
7 Press [Up/Down] key to move highlight and press press[Up/Down/left/right]key to move highlight and [OK] key to play the highlighted channel. press[OK]key to input the selected symbol or 8 Press [Page Up/Down] key to page up and page letterinto the dialogue. Down.
4. You can press [Green] key to select the 8.24 Exit programs by different select mode. 1 Press [EXIT] key can exit the current menu to last menu or close the window. 5. Press color key can implement the corresponding function in “Organizing 9.
Page 14
Then press [Right] key to move the high a) Select Delete icon by press [OK key to light to right toolbar. delete channel one by one. Select Move icon by press [Channel b) When you high light in channel list ,you Up/Channel Down] key and [OK] key.
Press [OK] key to enter the “Installation”. If Organizing Favourites Menu Lock is “On”, it will display a dialogue This menu is helpful in adding and deleting for user to enter in password. The default services to and from the favorite group. Password is “0000”.
Press [Red] key to enter blind scan menu, First Audio: Some channels have more or press [Green] key to enter TP scan than one audio language for choosing; by menu. this function you can set the first audio for Press [Exit] key to exit the scanning. this channel.
on a 4:3 TV, and 4:3 picture source will be too wide in a 16:9 TV but will be good display in a 4:3 TV. Digital Audio Out is for setting the both SPDIF and HDMI’s digital audio output mode, it has options LPCM Out, Auto, You can press [Left/Right] Key to select each mode circularity.
Timer Service: There are two options for “Timer Service”, include “TV Channel” and “Radio Channel” (timer setting for channel change and Wakeup/Sleep) and "Record Radio" and "Record TV" (Timer setting for Record the TV or Radio program to USB Hard Disk) and Message (reminding message).
In “Parental Lock” function, press [OK] key, there will pop an dialogue for you to input the password. When you input the correct password, you will see a screen like below: v. Wakeup Message: press [Left/Right]key to select reminding message as Birthday, Anniversary and General.
Position: control display position of the info 11.6 Miscellaneous Settings bar in full screen mode.You can choose When you enter to “ ” menu, Miscellaneous Settings you will see a screen like below: “bottom” or “top”. Debug: You can setting debug On/Off with this menu.
11.8.1 Default Value: In this menu ,you can dump the software to the USB equipment In "Backup file", you can press [OK] key to When you press [OK] key In the “Default edit the file name.; Press “Left/Right” button Setting” item: select USB A or USB B;...
whether confirm to delete all channel. If you select “OK”, all the channel will be deleted. 11.8.3 Save default value 12.1 Record In this menu you can playback the record files, and you can press [Red] key to rename the file, or press [Green] key to lock the file, or press When you press [OK] key in the “Save default [Yellow] key to delete the file.
⚫ right corner.if you want to watch the video in full Yellow Key: screen you can press [OK] button. Delete all the file by Yellow Key, but there is one remind “Delete All” before practical operation, if You can press [1] key to adjust the volume while you preview the video file,press [0]key to sort select Yes, all file will be deleted, and close the the file list.
Press 'OK' button on the selected files to play the files. After begin to play MP3, it will show the MP3 play window. Press “PAUSE” button to pause.. Press “PLAY” You can preview the picture at the top right button to play. Press “STOP” button to stop and corner if the scroll bar is on the picture files time return to 00:00.
⚫ Red Key: 12.5 PVR Setting Move the selected file by press Red key and [UP][DOWN] key.. ⚫ Green Key: Delete the selected file by press Green key. ⚫ Yellow Key: Press Yellow Key, will delete all image files in play list, but system will remind you “Delete All”...
12.6 Disk Manage In this menu you can select USB disk for HDD Format,HDD information and USB Speed test. Press “Blue” button to enter the USB Speed Test menu like the below picture,you can see the Standard speed and your USB harddisk speed, according this information you can know HDD Format what operation your disk can support..In this...
press [OK] key to draw back from the 13.1 Tetris game. a) Moving highlight to “Setup” and d) Start on the game: press[left/right]key to select the game ➢ [[left/right/ UP/ Down] use these level (speed). arrow keys to guidechessman. b) Moving highlight to “Start” and press [OK] ➢...
It will start the Time Shift function automatically after you switch the program, and when you press the "Tms" button the Time Shift info bar will displayed as the following picture: You can press " " button to pause the video.
16. Trouble Shooting If you suspect there is a fault with your receiver, please check the following trouble shooting guide before calling authorized service agent. Warning! Under no circumstances attempt to repair the receiver yourself. Tampering with the receiver may result in fatal electric shock and will invalidate your warranty. Symptom Possible cause The receiver lost power before being able to enter into standby...
17. Specifications SYSTEM RESOURCES Main Processor 594MHz based CPU Flash Memory 32Mbits DDR SDRAM 512 Mbits Tuner/Front-end(Optional) Tuner Type DVB-T/T2 Input Connector IEC, Connector, Female Signal Level -65 to -25 dBm ANT_Power output Voltage:+5V Current: Max.100mA Overload Protection Demodulation Code rates:1/4,1/3,2/5,1/2,3/5,2/3,3/4,4/5,5/6 Supports 1K/2K/4K/8K/16K/32K modes guard intervals: 1/4,19/128,1/8,19/256,1/16,1/32,1/128 QPSK, 16QAM,64QAM,256QAM...
Page 31
Type A PHYSICAL SPECIFICATION Size[W*H*D] 130mm * 66mm * 32mm Net Weight 0.5KG Operation Temperature 0℃~+45℃ Storage Temperature -10℃~+70℃ Storage Humidity 5%~95% RH (Non-Condensing) Specifications are subject to change without further notice. The manufacturer does not assume any responsibility regarding any errors or mistakes in printing. Please note that a new software may change the features of the receiver.
Need help?
Do you have a question about the T765 and is the answer not in the manual?
Questions and answers