Page 1
BIS-6564 Quick Setup Guide Packing List Description BIS-6564 Power Cable Power Adaptor HDD Mounting Bracket Rack Mount Ears Rack Mount Screws Drive Mounting Screws Safety Warning: The use and installation of this system should only be performed by professionals. Improper installation of any electronic device or electrical component can result in serious injury or death.
Page 2
Install Guide Step 1 - Inspect Contents Unpack all package contents and inspect each component. Make sure all included parts and accessories are present. Step 2 - Remove Top Cover Using a phillips head screw driver, remove the four screws on the sides of the enclosure. Step 3 - Install RAM Align notch in memory circuit with corresponding guide on the memory slot.
Page 3
Then mount the HDD bracket back onto the backplane and fix it. Place the cover as illustrated in the picture and connect SATA cable to HDD marked in lines. Step 5 - Rack Mounting Locate the included rack mount brackets (ears).