SCORPION G3-600 User Manual

Thank you for your purchase!

Our new Scorpion G3-600. This is our
third generation of range finders and has
incorporated many new features. Please read
the instructions thoroughly.
Before beginning, ensure the factory-supplied
CR2 battery has been installed correctly, by
removing all clear packaging and following the
+/- indicators on the unit.

Instructions

To change units and measuring mode
Select display unit (factory default display unit
is Meters)
1. Press the RANGE button to start up,
and confirm the normal power supply and
display of the liquid crystal.
2. Press the MENU button and hold for
more than 2 seconds to activate the unit
switch. (YD to M) or (Mto YD).
3. After the MENU button is released, you
can switch and keep the Settings.

Feature Selection

1. Single ranging mode: no mode
conversion, press RANGE to measure.
2. Default mode: ranging + Angle +
horizontal distance, press the MENU
button, the mode will be switched in the
following order (
HUNT MODE / AC
1
SCAN MODE
2
).
1 2
G3-600
600 YARD LASER RANGEFINDER USER MANUAL
After the MENU button is released, toggle and
keep the Settings, press the RANGE key for
measurement/range.
What's in the box?
The unit, hang rope, lens cloth.

Effective Range

Our new G3-600 will perform to at least a
range of 600 yards on most non-reflective
targets.
The measuring range of this series of
rangefinders is defined under the following
conditions:
1. Measuring the target's reflective surfaces
are perpendicular to the laser.
2. The weather for measuring should be
sunny but not under direct sunlight.
3. Generally, the maximum ranges for
G3 Rangefinders are determined under
perfect conditions. The maximum range
can be affected by poor air quality with
things like rain, snow, dust and smoke.
Bright sunshine will also reduce the laser
signal and may produce inconsistent
readings.
4. Under good conditions size, shape and
colour may influence the unit's ranging
ability.