Related Manuals for IQ Power Tools iQPC912VSK
Summary of Contents for IQ Power Tools iQPC912VSK
- Page 1 iQPC912 VSK US ® Operator’s Manual Please read the operator’s manual carefully and make sure you understand the instructions before using the machine.
- Page 2 M-iQPC912VSK-0M-1218...
-
Page 3: Table Of Contents
TABLE OF CONTENTS Topic Section Symbols On The Machine Explanation Of Warning Levels Introduction Design And Features iQTS244 What Is What? Machine’s Safety Equipment Blades Blades For Different Materials Assembling Mounting The Support Arm Connecting The Vacuum Motor Power Assembling The Table Extension Installing The Rolling Table Blade Installation Dust Guard Installation... -
Page 4: Symbols On The Machine
Unused masonry saw may before using the machine or cause personal injury - Remove this masonry saw blade when using other accessories. Always wear hearing protection. Always use manufacturer’s approved cutting wheels. 248014 iQPC912VSK 888-274-7744 Operator’s Manual www.iqpowertools.com... - Page 5 15. DIRECTION OF FEED. Feed work into a blade or cutter against the direction of rotation of the blade or cutter only. 16. NEVER LEAVE TOOL RUNNING UNATTENDED TURN POWER OFF. Don’t leave tool until it comes to a complete stop. iQPC912VSK 888-274-7744 Operator’s Manual www.iqpowertools.com...
-
Page 6: Introduction
INTRODUCTION Dear Customer The Manufacturer’s Reservation We at IQ Power Tools™ want to congratulate you on Subsequent to publishing this manual IQ Power Tools selecting the iQPC912®VSK Power cutter attachment may issue additional information for safe operation of Dust Control Attachment. We are certain that you will this product. -
Page 7: What Is What
12 - Fuel Tank 5 - Blade 13 - Filter Spin Handle 6 - Blade Guard 14 - Lower Dust Chamber 7 - Filter Housing 15 - Door Latch 8 - Front Handle 16 - Door Pull Handle 888-274-7744 iQPC912VSK www.iqpowertools.com Operator’s Manual... - Page 8 5 - Operating Procedure Label 13 - Engine Foot Support 6 - Filter Housing 14 - Clutch Cover 7 - Beam Cover 15 - Front Handle Brace 8 - Paver Skate 16 - Rear Handle iQPC912VSK 888-274-7744 Operator’s Manual www.iqpowertools.com...
- Page 9 9 - Combination T Spanner Tool 4 - Throttle Trigger Control 10 - Small Screwdriver 5 - Throttle Lock Out 11 - Allen Wrench 4mm 6 - Choke Control Lever 12 - Allen Wrench 5mm 888-274-7744 iQPC912VSK www.iqpowertools.com Operator’s Manual...
-
Page 10: Safety
Dust which are known to the Stat e of Califor nia to WORKING WITH PRODUCTS CONTAINING MOVING PARTS. cause cancer or birth defects or other reproductive harm . WEAR PROTECTIVE GLOVES TO AVOID BODY INJURIES. For more informat ion, go to www.p65Wa rnings .ca.go v iQPC912VSK 888-274-7744 Operator’s Manual www.iqpowertools.com... -
Page 11: Work Area Safety
• Always perform daily maintenance before Check that the guard is complete and without any starting the machine. See instructions in the cracks or deformations. 888-274-7744 iQPC912VSK www.iqpowertools.com Operator’s Manual... - Page 12 • Always use a fuel container with an qualified specialists. See instructions under the heading anti-spill valve. Maintenance. Always use genuine accessories. Contact your dealer for more information. iQPC912VSK 888-274-7744 Operator’s Manual www.iqpowertools.com...
- Page 13 Regularly check that the muffler is securely stops and remains stationary. If the cutting blade attached to the machine. rotates when the throttle is in the idle position you should check the carburetor’s idle adjustment. 888-274-7744 iQPC912VSK www.iqpowertools.com Operator’s Manual...
- Page 14 • Keep a good balance and a firm foothold. • Always cut at maximum recommended speed. • Stand at a comfortable distance from the work piece. • Take care when inserting the blade in an existing cut. • Never cut above shoulder height. iQPC912VSK 888-274-7744 Operator’s Manual www.iqpowertools.com...
- Page 15 Never use a cutting blade with a lower speed rating Always remove the cutting blade when the machine is than that of the power cutter. transported. Ensure the blade it not cracked or damaged in any other way. 888-274-7744 iQPC912VSK www.iqpowertools.com Operator’s Manual...
- Page 16 LOSS OF FEELING, TINGLING, PRICKING, PAIN, LOSS OF STRENGTH, CHANGES IN SKIN COLOR OR CONDITION. Tightening torque for the bolt holding the blade is: 15-25 THESE SYMPTOMS NORMALLY APPEAR IN THE FINGERS, HANDS OR WRISTS. iQPC912VSK 888-274-7744 Operator’s Manual www.iqpowertools.com...
- Page 17 ENGINE BEFORE REFUELING. WHEN REFUELING, OPEN THE FUEL CAP SLOWLY SO THAT ANY EXCESS PRESSURE IS RELEASED GENTLY. TIGHTEN THE FUEL CAP CAREFULLY AFTER REFUELING. ALWAYS MOVE THE MACHINE AWAY FROM THE REFUELING AREA BEFORE STARTING.. 888-274-7744 iQPC912VSK www.iqpowertools.com Operator’s Manual...
- Page 18 Press the decompression valve and the engine should start on next pull. When the engine starts, quickly apply full throttle to automatically disengage fast idle iQPC912VSK 888-274-7744 Operator’s Manual www.iqpowertools.com...
- Page 19 HARMFUL DUST. position. DUMPING DUST AND DEBRIS Continue cutting After cutting approximately 5 feet or cycling the filter five times the lower dust collection chamber will be full and must be dumped. 888-274-7744 iQPC912VSK www.iqpowertools.com Operator’s Manual...
- Page 20 MAINTENANCE & TROUBLE SHOOTING OVERVIEW IF YOU SEE DUST ESCAPING The iQPC912VSK power cutter is a innovative tool that integrates a power cutter and a dust collection vacuum and filtration system. Because the IQPC912VSK incorporates a vacuum system the operator needs...
- Page 21 - If the machine is low on power, difficult to start are removed for maintenance. or runs poorly at idle speed: always check the spark plug first before taking other steps. (to access the spark plug remove the filter cover) (A) 888-274-7744 iQPC912VSK www.iqpowertools.com Operator’s Manual...
- Page 22 COULD COME LOOSE AND CAUSE PERSONAL INJURIES. A special iQ Power Tools oil has been produced for this purpose. Remove the foam pre-filter (C) Wash the filter well in tepid soapy water. After cleaning, rinse the filter well in clean water.
- Page 23 When the cord is intact: Release the spring tension by letting the pulley rotate slowly backwards. (E) Guide the cord through the cut-out in the periphery of the pulley and wind the cord 3 times clockwise around the center of the starter pulley. 888-274-7744 iQPC912VSK www.iqpowertools.com Operator’s Manual...
- Page 24 The hooks hold the return spring assembly on the starter. - Lubricate the recoil spring with light oil. Fit the pulley and tension the recoil spring. iQPC912VSK 888-274-7744 Operator’s Manual www.iqpowertools.com...
- Page 25 - (C) Inspect filter seal for proper lubrication, apply IQ filter seal lube as necessary. - (D) Inspect bushing on filter cover plate and filter, replace new bushing with those provided with filter replacement kit. 888-274-7744 iQPC912VSK www.iqpowertools.com Operator’s Manual...
-
Page 26: General Maintenance
5. Check that the fuel cap and its seal are not damaged. 6. Check all wires and connections. 7. Check pulley drive belt, replaced if necessary. 8. Check dump door latching and opening mechanism, replace wear parts as needed. iQPC912VSK 888-274-7744 Operator’s Manual www.iqpowertools.com... -
Page 27: Technical Data
TECHNICAL DATA ENGINE IQPC912VSK Cylinder displacement 93.6 cm3 Cylinder bore 56 mm Stroke 38 mm Idle speed 2700 rpm Recommended max. speed 9000 rpm Power HP/KW/RPM 6.0/4.5/9000 IGNITION SYSTEM Manufacturer of ignition system Walbro Type of ignition system Spark plug... - Page 28 WARRANTY New iQPC912®VSK, Power cutter attachment, sold Parts and labor needed to maintain products, and by iQ Power Tools or an iQ authorized dealer is the replacement of components due to normal warranted to be free from manufacturing defects wear and tear, are the purchaser’s responsibility in normal service for a 90 day period from date and are not covered by this Warranty.
- Page 29 888-274-7744 | WWW.IQPOWERTOOLS.COM...
Need help?
Do you have a question about the iQPC912VSK and is the answer not in the manual?
Questions and answers