Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Summary of Contents for Satel SENNET DL150
- Page 1 Dataloggers series & Device network DL150 DL151 DL170 DL171 DL172...
-
Page 2: Content
Dataloggers SenNet DL150 / DL151 / DL170 / DL171 / DL172 Technical Manual CONTENT Version 1.01 Satel Spain... -
Page 3: Table Of Contents
Dataloggers SenNet DL150 / DL151 / DL170 / DL171 / DL172 Technical Manual LIST OF CONTENTS CONTENT ..................................2 List of contents ................................3 List of figures ................................6 WARNINGS .................................. 9 Before installing your SenNet device ......................10 CHARACTERISTICS ..............................11 About SenNet dataloggers .......................... - Page 4 Dataloggers SenNet DL150 / DL151 / DL170 / DL171 / DL172 Technical Manual 5.2. Connection of the RF and Z-Wave antennas (both optional) ............26 5.3. USB / Wi-Fi port connection ........................ 26 5.4. Ethernet port connection ........................26 5.5.
- Page 5 Dataloggers SenNet DL150 / DL151 / DL170 / DL171 / DL172 Technical Manual 15.1.1. Network Parameters ......................... 56 15.1.2. Operating Parameters....................... 56 15.1.3. Modbus TCP ..........................57 15.1.4. GPRS parameters ........................57 15.1.5. DNS parameters......................... 59 15.1.6. FTP parameters .......................... 59 15.1.7.
-
Page 6: List Of Figures
Dataloggers SenNet DL150 / DL151 / DL170 / DL171 / DL172 Technical Manual LIST OF FIGURES Figure 1. Along with the dataloggers, SenNet offers a wide range of peripherals to monitor a wide range of variables ............................... 12 Figure 2. Front and back sides of the datalogger SenNet DL - 150 ..............18 Figure 3. - Page 7 Dataloggers SenNet DL150 / DL151 / DL170 / DL171 / DL172 Technical Manual Figure 43. Overview of the submenu Platform params, within the menu Configuration. The platforms' buttons may vary depending on the model of datalogger and on the integrator's specifications .... 68 Figure 44.
-
Page 9: Warnings
Manual Datalogger SenNet DL150 / DL151 / DL170 / DL171 / DL172 WARNINGS Version 1.01 Satel Spain... -
Page 10: Before Installing Your Sennet Device
Manual Datalogger SenNet DL150 / DL151 / DL170 / DL171 / DL172 1. BEFORE INSTALLING YOUR SENNET DEVICE Prior to installation, carefully read the technical specifications and the mode of handling. Danger! Danger! Risk of damage to the Risk of electric shock or... -
Page 11: Characteristics
Manual Datalogger SenNet DL150 / DL151 / DL170 / DL171 / DL172 CHARACTERISTICS Version 1.01 Satel Spain... -
Page 12: About Sennet Dataloggers
Dataloggers SenNet DL150 / DL151 / DL170 / DL171 / DL172. Technical manual 2. ABOUT SENNET DATALOGGERS The Dataloggers SenNet DL150, DL151, DL170, DL171 and DL172 are devices M2M (Machine to Machine) that can capture data, archive then locally and send them to a data management server to be processed. -
Page 13: Technical Characteristics
Dataloggers SenNet DL150 / DL151 / DL170 / DL171 / DL172. Technical manual 3. TECHNICAL CHARACTERISTICS Depending on the model, SenNet dataloggers have the following characteristics Characteristics DL150 DL151 DL170 DL171 DL172 Power supply 5Vdc 5Vdc 8..30Vdc 8..30Vdc 8..30Vdc Connectivity CT or Rogowski ✓... -
Page 14: Supported Protocols
Dataloggers SenNet DL150 / DL151 / DL170 / DL171 / DL172. Technical manual 3.1. Supported protocols Depending on the model, SenNet dataloggers can have the following ports: RS485, Ethernet, RS232, GPRS, HDMI, USB and radio frequency. The dataloggers can capture data from external devices that have compatible interface. -
Page 15: Compliance
Dataloggers SenNet DL150 / DL151 / DL170 / DL171 / DL172. Technical manual Current output 5V @ 300mA ▪ The dataloggers SenNet DL151, DL171 and DL172 also have the following inputs: Voltage measurement inputs and current metering inputs: neutral, phases 1, 2 and 3. To meter: ▪... -
Page 16: Z-Wave Radio
Dataloggers SenNet DL150 / DL151 / DL170 / DL171 / DL172. Technical manual 3.5. Z-Wave Radio Optional. Available for models: DL150, DL151, DL170 and DL171 Module: Z-Wave Transceiver Sigma Designs ZM5202 ▪ Frequency 868.4 MHz (EN 300 220). Free use in the European Union. Also available in 869.0 ▪... -
Page 17: Precision
Dataloggers SenNet DL150 / DL151 / DL170 / DL171 / DL172. Technical manual Rogowski coils: for currents from 100A to 5000A 3.6.5. Precision 3.6.6. Indicators SenNet dataloggers are equipped with pulse outputs that indicate the evolution of the active / reactive and apparent power in real time via LED diodes. -
Page 18: Dl - 150 Technical Specifications
Dataloggers SenNet DL150 / DL151 / DL170 / DL171 / DL172. Technical manual 3.7. DL – 150 Technical specifications Power supply 5 Vdc Connectivity Ethernet Wi-Fi (USB port) HDMI (optional) Interface RS485 Terminal (TTL levels) Operating system Linux 3.8.13 ARM® Cortex ®-A-8- based core, 600 MHz to 1... -
Page 19: Dl - 151 Technical Specifications
Dataloggers SenNet DL150 / DL151 / DL170 / DL171 / DL172. Technical manual 3.8. DL – 151 Technical specifications Power supply 5 Vdc Connectivity Ethernet Wi-Fi (USB port) HDMI (optional) Interface RS485 Terminal (TTL levels) Operating system Linux 3.8.13 ARM® Cortex ®-A-8- based core, 600 MHz to 1... -
Page 20: Dl - 170 Technical Specifications
Dataloggers SenNet DL150 / DL151 / DL170 / DL171 / DL172. Technical manual 3.9. DL – 170 Technical specifications Power supply 8..30 Vdc Connectivity Ethernet GSM-GPRS Wi-Fi (USB port) HDMI (2G) (3G) optional optional optional Interface RS485 RS232 RS232 (terminal) -
Page 21: Dl - 171 Technical Specifications
Dataloggers SenNet DL150 / DL151 / DL170 / DL171 / DL172. Technical manual 3.10. DL – 171 Technical specifications Power supply 8..30 Vdc Connectivity Ethernet GSM-GPRS Wi-Fi (USB port) HDMI (2G) (3G) optional optional optional Interface RS485 RS232 RS232 (terminal) -
Page 22: Dl - 172 Technical Specifications
Dataloggers SenNet DL150 / DL151 / DL170 / DL171 / DL172. Technical manual 3.11. DL – 172 Technical specifications Power supply 8..30 Vdc Connectivity Ethernet GSM-GPRS (2G) (3G) optional Interface RS485 RS232 RS232 (terminal) Inputs and outputs (x1) output (x3) standard output... -
Page 23: Connection Of The Datalogger
Dataloggers SenNet DL150 / DL151 / DL170 / DL171 / DL172. Technical manual CONNECTION OF THE DATALOGGER Version 1.01 Satel Spain... -
Page 24: Connection Of The Dl-150
Dataloggers SenNet DL150 / DL151 / DL170 / DL171 / DL172. Technical manual 4. CONNECTION OF THE DL-150 4.1. Connection to the power supply There are two possibilities to connect the datalogger to the power supply. Through DC jack (5Vdc, input ‘PWR’) ▪... -
Page 25: Ethernet Port Connection
Dataloggers SenNet DL150 / DL151 / DL170 / DL171 / DL172. Technical manual 4.4. Ethernet port connection The Ethernet port is on the side of the terminals and the power supply. 4.5. RS485 port connection The terminals of the RS485 port are located next to the power-supply terminals. See “Figure 7. -
Page 26: Connection Of The Dl-151
Dataloggers SenNet DL150 / DL151 / DL170 / DL171 / DL172. Technical manual 5. CONNECTION OF THE DL-151 5.1. Connection to the power supply The same instructions as for the DL150 model should be followed (see section 4.1 24Connection to the power supply, p. -
Page 27: Preliminary Considerations For Connecting The Electricity Meters
Dataloggers SenNet DL150 / DL151 / DL170 / DL171 / DL172. Technical manual At least (without prejudice to the applicable law), to install equipment in the electrical panels, the technicians must be equipped with: goggles, gloves and boots approved for working on electrical installations. -
Page 28: Configuration As 3 Three-Phase Meters
Dataloggers SenNet DL150 / DL151 / DL170 / DL171 / DL172. Technical manual Figure . Terminals for the current reference (in a red rectangle) In case SenNet CT probes (0.33Vac) are used, they must be installed with the label pointing toward the black wire connected to the terminal CT- and the white one to CT+ Use a cable with a maximal cross section of 1.5 mm... -
Page 29: Configuration As 9 Single-Phase Meters
Dataloggers SenNet DL150 / DL151 / DL170 / DL171 / DL172. Technical manual Voltage Three-phase 1 Three Phase 2 Three phase 3 reference I1+ I1- I2+ I2- I3+ I3- I1+ I1- I2+ I2- I3+ I3- I1+ I1- I2+ I2- I3+ I3- VN V1 V2 V3 Figure 9. -
Page 30: Figure 10. Example: Connection Of A Three-Phase Electricity Meter
Dataloggers SenNet DL150 / DL151 / DL170 / DL171 / DL172. Technical manual Rogowski coils 200A-500A 200 – 5000 A Rogowski coils can be used OR ALSO 5 – 1500 A GENERAL current transformers GENERAL Figure 10. Example: Connection of a three-phase electricity meter Satel Spain Version 1.01... -
Page 31: Figure 11. Example. Connection Of 3 Three-Phase Electricity Meters
Dataloggers SenNet DL150 / DL151 / DL170 / DL171 / DL172. Technical manual GENERAL Split-core CT’s 5 - 800 LIGHTING Figure 11. Example. Connection of 3 three-phase electricity meters Version 1.01 Satel Spain... -
Page 32: Figure 12. Example. Connection Of 2 Three-Phase Meters And 3 Single-Phase. The Single-Phase Meter Must Be Connected To Different Phases (R, S Or T)
Dataloggers SenNet DL150 / DL151 / DL170 / DL171 / DL172. Technical manual GENERAL Split-core CT’S 5 – 800 A LIGHTING LIGHTING LIGHTING FLOOR1 FLOOR 2 OUTDOORS Figure 12. Example. Connection of 2 three-phase meters and 3 single-phase. The single-phase meter must be connected to different phases (R, S or T). -
Page 33: Figure 13. Example. Connection Of 3 Three-Phase Meters And A Meter From The Utility Company Via Rs232 Or Rs485 (Serial Port)
Dataloggers SenNet DL150 / DL151 / DL170 / DL171 / DL172. Technical manual RS232 / RS485 GENERAL LIGHTING Figure 13. Example. Connection of 3 three-phase meters and a meter from the utility company via RS232 or RS485 (serial port). Version 1.01... -
Page 34: Configuration As A Combination Of Three-Phase And Single-Phase Meters
Dataloggers SenNet DL150 / DL151 / DL170 / DL171 / DL172. Technical manual In single-phase circuits, the terminals V1, V2 and V3 should be connected to the load, and the terminal VN to the neutral wire. L can be connected for example to the terminal V1 and then with a jumper to the terminals V2 and V3. -
Page 35: Current Transformers And Rogowski Coils
Dataloggers SenNet DL150 / DL151 / DL170 / DL171 / DL172. Technical manual That is, the possible combinations are: 9 single-phase, ▪ 3 single-phase + 2 three-phase, ▪ 6 single-phase + 1 three-phase ▪ or 3 three-phase meters ▪ If you want to measure a single-phase load that is associated with a particular phase, the current transformer must be connected to the terminal of the same phase. - Page 36 Dataloggers SenNet DL150 / DL151 / DL170 / DL171 / DL172. Technical manual Current transformers with 0.333V output, standardized for the following amperages (currents): ▪ 400A 800A 100A 1500A 150A Connection of the CT’s: Black: negative ▪ White: positive ▪...
-
Page 37: Connection Of The Dl-170
Dataloggers SenNet DL150 / DL151 / DL170 / DL171 / DL172. Technical manual 6. CONNECTION OF THE DL-170 6.1. Connection to the power supply The models DL170, DL171 and DL172 are powered with a battery or with a stabilized power source 8- 30 Vdc. -
Page 38: Usb / Wi-Fi Port Connection
Dataloggers SenNet DL150 / DL151 / DL170 / DL171 / DL172. Technical manual 6.3. USB / Wi-Fi port connection The same instructions as for the DL150 model should be followed (see 4.3 USB / Wi-Fi port connection p. 24). 6.4. Ethernet port connection The Ethernet port is in the opposite side to terminals and close to the GPRS and RF antennas. -
Page 39: Rs485 Port Connection
Dataloggers SenNet DL150 / DL151 / DL170 / DL171 / DL172. Technical manual 6.7. RS485 port connection Terminal 11 Terminal 12 LOAD LOAD 2 Figure 18. How to connect the outputs. Wiring diagram The device has 5 LEDs with the functions specified below: Application Status LED (App Status): this LED should flash at a frequency of 1 Hz. - Page 40 Dataloggers SenNet DL150 / DL151 / DL170 / DL171 / DL172. Technical manual Description of the terminals of the model DL170 Terminals Reference Description Power 8-30 Vdc (the use of a 2A fuse is recommended) RS485 port RS232 port Vout-aux...
-
Page 41: Connection Of The Dl-171
Dataloggers SenNet DL150 / DL151 / DL170 / DL171 / DL172. Technical manual 7. CONNECTION OF THE DL-171 7.1. Connection to the power supply The same instructions as for the DL170 model should be followed (see section Error! Reference source not found.6.1 Connection to the power supply, p. -
Page 42: Connection Of The Dl172
Dataloggers SenNet DL150 / DL151 / DL170 / DL171 / DL172. Technical manual 8. CONNECTION OF THE DL172 8.1. Connection to the power supply The same instructions as for the DL170 model should be followed (see section 6.1 Connection to the power supply, p. -
Page 43: Figure 19. Electricity Meters Of The Model Dl172. Terminals Diagram
Dataloggers SenNet DL150 / DL151 / DL170 / DL171 / DL172. Technical manual For easier installation, we recommend not to use ferrules (end sleeves) to connect the cables to the electricity meters 4, 5 and 6 in the model DL172 Figure 19. -
Page 45: Datalogger's Setting
Manual Datalogger SenNet DL150 / DL151 / DL170 / DL171 / DL172 DATALOGGER’S SETTING Versión 1.01 Satel Spain... -
Page 46: Access To The Datalogger's Interface
Manual Datalogger SenNet DL150 / DL151 / DL170 / DL171 / DL172 9. ACCESS TO THE DATALOGGER’S INTERFACE In order to start the set-up of the datalogger, you must follow these steps: Connect the datalogger to a PC using an Ethernet cable (or connect the datalogger to an ▪... -
Page 47: Main Interface Menu
Manual Datalogger SenNet DL150 / DL151 / DL170 / DL171 / DL172 MAIN INTERFACE MENU Once you enter the correct user and password, you will see a screen similar to this: Figure 21. Interface menus The interface menus may vary depending on the model and license. In this manual only the most... -
Page 48: Menu "Access Data Captured
Manual Datalogger SenNet DL150 / DL151 / DL170 / DL171 / DL172 MENU “ACCESS DATA CAPTURED” The datalogger allows you to view the data captured directly in your web browser clicking on the button "Access Data Captured". Figure 22. Menu 'Access data captured', overview... -
Page 49: Menu "Input / Output
Manual Datalogger SenNet DL150 / DL151 / DL170 / DL171 / DL172 MENU “INPUT / OUTPUT” In this menu you can see the digital inputs and outputs of the datalogger. The buttons available are 3: inputs: Overview of the inputs and its status. On/Off. -
Page 50: Menu "Rf Network
Manual Datalogger SenNet DL150 / DL151 / DL170 / DL171 / DL172 MENU “RF NETWORK” By default, the radio network is enabled. If the radio network is disabled, you will see the message: "RF Network disabled!" This menu provides information on the devices connected to the datalogger by radio frequency. For each appliance it reports: serial number. -
Page 51: Menu"Internal Meters" Abc Method
Manual Datalogger SenNet DL150 / DL151 / DL170 / DL171 / DL172 MENU“INTERNAL METERS” ABC METHOD The DL151, DL171 and DL172 models incorporate a function to check the correct connection of voltages and currents, called ABC METHOD. Figure 26. Overview of the menu Internal Meters, used to apply the ABC method to check the connection of the internal electricity meters. -
Page 52: Figure 27. Message Shown At Step B. In This Case, There Are Two Phases That Measure Generation And
Manual Datalogger SenNet DL150 / DL151 / DL170 / DL171 / DL172 Checking the polarity (this step must be carried out for each ▪ B, Check current sensor orientation. of the meters that will be used). For each phase the system will display a message about what... - Page 53 Manual Datalogger SenNet DL150 / DL151 / DL170 / DL171 / DL172 ▪ If the nominal value of the probe is less than 1000A and the resulting value of 5 per thousand is higher than 1A, then 1A is used as the smallest threshold.
-
Page 54: Menu "Configuration
Manual Datalogger SenNet DL150 / DL151 / DL170 / DL171 / DL172 MENU “CONFIGURATION” Figure 28. Overview of the menu "Configuration" NOTE: The options vary from one version to another. This manual only describes the main options: parameters: configure the general operation parameters of the datalogger. -
Page 55: General Parameters
Manual Datalogger SenNet DL150 / DL151 / DL170 / DL171 / DL172 15.1. General parameters In this menu you will find the ( ), the general metering parameters of the datalogger Network Parameters , the , the , the connection to a server... -
Page 56: Network Parameters
Manual Datalogger SenNet DL150 / DL151 / DL170 / DL171 / DL172 15.1.1. Network Parameters Datalogger IP: The IP address you want to assign to the datalogger. ▪ Gateway IP: To access to the datalogger through Ethernet. If you want to access through ▪... -
Page 57: Modbus Tcp
Manual Datalogger SenNet DL150 / DL151 / DL170 / DL171 / DL172 15.1.3. Modbus TCP This section must be configured only in case you want to interrogate an external server. The options are: : the datalogger includes a Modbus TCP server. For example, it can be interrogated by ▪... -
Page 58: Figure 32. Gprs Status Menu
. Then, register the account in the menu "Configuration> DynDNS". You will see a screen like this: Contact Satel Spain or your SenNet supplier to know how to configure the datalogger depending on the telephone operator. The field PIN must always be filled in. If the PIN of the SIM card is not enabled (recommended), introduce 0000 (four zeros). -
Page 59: Dns Parameters
Manual Datalogger SenNet DL150 / DL151 / DL170 / DL171 / DL172 Figure 33. GPRS status button 15.1.5. DNS parameters : main DNS server IP ▪ DNS1 : second DNS server IP ▪ DNS2 If no IP of DNS server is specified, the datalogger does not resolve the DNS. It is recommended to leave the default values. -
Page 60: Rf Parameters
(peripherals). The default is Network is number 1. 15.1.8. Storage parameters In order to configure the storage parameters it is essential to have a microSD card. Ask Satel Spain or your SenNet supplier in case you want a special card for industrial uses. -
Page 61: Figure 35. Overview Of The Application Parameters Menu
IP / port. You can also indicate the communications parameters: 9N81, 9600 bps, No parity, 8 data bits, 1 stop bit. Contact the technical department of Satel Spain for each specific device. In the case of the SenNet RF network you should indicate the serial number of the radio peripheral after RF. For example RF2030. -
Page 62: Configuring A Device Modbus Tcp / Rtu Generic
Manual Datalogger SenNet DL150 / DL151 / DL170 / DL171 / DL172 In order to save the changes made in this screen, it is necessary to click on Accept and then click on the Save Changes button in the Configuration menu. See 0. To change the password you will be asked to introduce your old password and the new password twice. -
Page 63: Connecting A Knx Device
Not all devices with KNX protocol are implemented to be directly connected to the datalogger. Ask your SenNet supplier or contact Satel Spain if you need to connect to any particular device. To connect a KNX device, first select the box from >... -
Page 64: Figure 38. Display Mode Of The Z-Wave Platform
Manual Datalogger SenNet DL150 / DL151 / DL170 / DL171 / DL172 Visualization mode http://192.168.1.35:8083 ▪ Press the configuration icon (gear wheel). ▪ Figure 38. Display mode of the Z-Wave platform You have to copy the code shown next to the name of the device (see image below). -
Page 65: Connecting An Iec 62056 (Dlms / Cosem)
Manual Datalogger SenNet DL150 / DL151 / DL170 / DL171 / DL172 15.2.4. Connecting an IEC 62056 (DLMS / COSEM) The IEC 62056 standard is the international version of the DLMS / COSEM protocol (Device Language Message Specification / Companion Specification for Energy Metering).SenNet dataloggers are compatible with this protocol. -
Page 66: Figure 41. Overview Of The Submenu Actions, Within The Menu Configuration. In This Example, 5 Have Been Set For 5 Presence Detectors
Manual Datalogger SenNet DL150 / DL151 / DL170 / DL171 / DL172 Figure 41. Overview of the submenu actions, within the menu Configuration. In this example, 5 have been set for 5 presence detectors Select how many actions you want to define and for each action indicate: description of the action ▪... -
Page 67: Dyn Dns
Ask your SenNet supplier or contact Satel Spain if you need to connect to any particular platform. After doing the any change on this screen, click on Accept and then on the Save Changes button on the Configuration menu. -
Page 68: Carriots
Manual Datalogger SenNet DL150 / DL151 / DL170 / DL171 / DL172 Figure 43. Overview of the submenu Platform params, within the menu Configuration. The platforms' buttons may vary depending on the model of datalogger and on the integrator's specifications 15.7.1. -
Page 69: Sennet Api
Manual Datalogger SenNet DL150 / DL151 / DL170 / DL171 / DL172 After doing the any change on this screen, click on Accept and then on the Save Changes button on the Configuration menu. See 15.9 Save changes, p. 72 15.7.2. - Page 70 Manual Datalogger SenNet DL150 / DL151 / DL170 / DL171 / DL172 Where: version: the SenNet API's version (V1 or V2) ▪ datalogger_id: the MAC address (without colon “:”). For example, if the MAC is "D8: 50: 34: C0: ▪...
-
Page 71: Sofia2 Credentials
Manual Datalogger SenNet DL150 / DL151 / DL170 / DL171 / DL172 “device-id” instead of “device_id” After doing the any change on this screen, click on Accept and then on the Save Changes button on the Configuration menu. See 15.9 Save changes, p. 72 15.7.3. -
Page 72: Flythings
Flythings. Finally, you must save the data in the menu Configuration>Save Changes. Satel Spain is not the developer of this platform. You can find more information at https://viridityenergy.com/ After doing the any change on this screen, click on Accept and then on the Save Changes button on the Configuration menu. -
Page 73: Access To Data Through Modbus Tcp
Manual Datalogger SenNet DL150 / DL151 / DL170 / DL171 / DL172 ACCESS TO DATA THROUGH MODBUS TCP The datalogger allows you to send the data to a server through a standard Modbus TCP protocol. With this type of connection the datalogger can be used, for instance, to monitor a SCADA. This functionality can simultaneously operate with the automatic submission to a server. -
Page 74: Device's Data
Manual Datalogger SenNet DL150 / DL151 / DL170 / DL171 / DL172 16.2. Device’s data 16.2.1. Common to all devices Address (Modicon format) Description 4nn01 Device’s ID 4nn02 Year in which the data was captured 4nn03 Month in which the data was captured... -
Page 75: Access To Data Through Xml
Manual Datalogger SenNet DL150 / DL151 / DL170 / DL171 / DL172 ACCESS TO DATA THROUGH XML Using the port 8080 you can request the datalogger to send the data in XML format. Below are described the types of files that can be requested. -
Page 76: Data.xml
Manual Datalogger SenNet DL150 / DL151 / DL170 / DL171 / DL172 sn: serial number GPRS: data on the datalogger's GPRS session. Attributes: ▪ status: It indicates whether the GSM / GPRS module is started ip: Indicates the acquired IP address ( "na" if it is not available) rssi: Indicates the signal level ( "na"... -
Page 77: Data_Saved.xml
Manual Datalogger SenNet DL150 / DL151 / DL170 / DL171 / DL172 password: In this case, the password used is MYPASSWORD, but each datalogger can have a ▪ different one Sample answer: In this example there are two different types of devices (SenNet Meter and MK Meter). Each device has its corresponding information channels: 18 channels for SenNet Meter and 5 channels for MK Meter. - Page 78 Manual Datalogger SenNet DL150 / DL151 / DL170 / DL171 / DL172 channel: channel name date: date of the data time: time of the data value: value of the data channel ID Example of a request made to a datalogger: http://192.168.1.35:8080/services/data_saved.xml?dev_id=1?channel=[2][5]?date_ini=2013-9-...
- Page 79 Manual Datalogger SenNet DL150 / DL151 / DL170 / DL171 / DL172 </dev> </dl> The maximum interval allowed is 365 days and the maximum file size downloadable is 500KB. If the size is greater, will skip all records from 500KB; however, the days transmitted will be complete.
-
Page 80: Access To The Datalogger Through The Console Port (Rs232)
Manual Datalogger SenNet DL150 / DL151 / DL170 / DL171 / DL172 ACCESS TO THE DATALOGGER THROUGH THE CONSOLE PORT (RS232) The datalogger has an RS232 port for maintenance and supervision. To use it, you must connect it to the RS232 of a PC, either directly or via an RS232 to USB converter. -
Page 81: Access To The Datalogger Through Ssh
Manual Datalogger SenNet DL150 / DL151 / DL170 / DL171 / DL172 ACCESS TO THE DATALOGGER THROUGH SSH The datalogger integrates an SSH server that will allow you to remotely access its Linux shell. This access should be used only by experts in Linux that know the internal structure of the datalogger files. -
Page 82: Access To The Datalogger Through Loggercontrol
Manual Datalogger SenNet DL150 / DL151 / DL170 / DL171 / DL172 ACCESS TO THE DATALOGGER THROUGH LOGGERCONTROL LoggerControl is an application developed by Satel Spain that allows monitoring and remote control of the datalogger. LoggerControl allows operations such as: Remote monitoring of the operation, including log recording for further analysis in case ▪... -
Page 83: Examples: Configuration Of Connected Devices
Manual Datalogger SenNet DL150 / DL151 / DL170 / DL171 / DL172 EXAMPLES: CONFIGURATION OF CONNECTED DEVICES When a new electricity meter is added to the datalogger's network, it must be indicated, whether it is 0.33V or Rogowski type, as well as the rated intensity (current) of the CT or Rogowski probe. The way to indicate in the application the rated current is in the "param"... -
Page 84: Figure 47. Example Of Real-Time Monitoring With Real Time Serial Data Plot
Manual Datalogger SenNet DL150 / DL151 / DL170 / DL171 / DL172 Figure 47. Example of real-time monitoring with Real Time Serial Data Plot The valid parameters for RS232 configuration are: Speed: 38400 ▪ Parity: NONE ▪ Data bits: 8 ▪... -
Page 85: Datalogger's Customization
If you are a Systems integrator, ask Satel Spain for a special username and password to customize the datalogger. Figure 48. Overview of the configuration screen The logo file that is imported from your PC should be renamed as "logo.jpg". - Page 87 For further information on SenNet products, please, contact sales@satelspain.com www.sennetmonitoring.com For technical support support@satelspain.com info@satelspain.com www.sennetmonitoring.com...
Need help?
Do you have a question about the SENNET DL150 and is the answer not in the manual?
Questions and answers