Living Spaces 305-S362-730 Assembly Instructions Manual

Replacement Parts
Replacement parts, including additional guardrails, may be obtained from place of purchase or Original
distribution
Size of Mattress
This bed is designed to use a twin mattress 37.5" to 38.5" wide x 74" to 75" long with the total thickness
not exceeding 8" for upper bunk and lower bunk. Do not use mattress without the proper slat system and
proper attachments described in the instructions. NOTE: there must be at least 5 inches from the top
surface of the mattress to top edge of guardrail.
Replacement Parts
Keep all instruction sheets for future reference to assemble bed for moving and/or different set up.
1. Follow the information on the warning appearing on the upper bunk end structure and on the
carton. Do not remove warning label from bed.
2. Always use the recommended size mattress or mattress support, or both, to help prevent the
likelihood of entrapment or falls.
3. Surface of mattress must be at least 5 inches below the upper edge of the guardrails.
4. Do not allow children under 6 years of age to use the upper bunk.
5. Prohibit more than one person on upper bunk.
6. Periodically check and ensure that the guardrail, ladder,and other components are in their proper
position, free from damage, and that all connectors are tight.
7. Do not allow horseplay on or under the bed and prohibit jumping on the bed.
8. Alway use the ladder for entering and leaving the upper bunk.
9. Do not use any substitute parts. Contact manufacturer or dealer for replacement parts.
10. Use of a night light may provide added safety precaution for a child using the upper bunk.
11. If the bunk bed will be placed next to a wall, the guardrail that runs the full length of the bed
should be placed against the wall to prevent entrapment between the bed and the wall.
12. Always use guardrails on both long sides of the upper bunk.
1. The use of water or sleep flotation mattress is prohibited.
14. Keep these instructions for future reference.
15. Strangulation Hazard -Never attach or hang items to any part of the bunk bed that are not
designed for use with the bed: for example, but not limited to, hooks, belts, and jump
ASSEMBLY INSTRUCTIONS
DESCRIPTION: 3/3 BUNK BED
SAFETY WARNING !
ropes.
Page 1 of 7