Bio-Well Calibration Pack User Manual

Calibration Pack User Manual
GETTING STARTED

Calibration Pack Overview

The Bio-Well Calibration pack contains attachments that will allow you to
calibrate your Bio-Well device to have reproducible reliable data both for human
tests and for Sputnik. In order to conduct Environment scans you must have the
Bio-Well device and a Bio-Well Subscription Plus (or above) subscription. For
more information on subscriptions, visit
In the Calibration process we use sophisticated software, which measures
parameters of your Bio-Well device, compare them with the standard parameters
and using step-by-step algorithm changes the settings of the device. The process
of measurements and setting may be repeated several times until the parameters
coincide with the standard ones. Depending on initial settings it may take from 5
to 20 minutes.
To have reproducible reliable data both for human tests and for Sputnik you need
to make calibration in the following situations:
1. You move from one climate zone to another.
2. Full moon, new moon.
3. Strong change of weather conditions.
4. Change of seasons.
5. Parameters of Bio-Well are sensitive to the humidity of air, so if you expect
their change, you need to make calibration.
To make calibration your computer have to be connected to Internet.
The Bio-Well Calibration Pack contains the following items:
- Grounding Cable
- Titanium Cylinder insert
- Plastic stand
www.Bio-Well.com