Advertisement
Quick Links
Advertisement
Summary of Contents for ATELLANI BRID
- Page 1 BRID User Manual...
- Page 3 BRID User Manual Thank you for choosing Brid By purchasing BRID, you made the wise decision to improve the quality of the air you breathe Please read this manual before use Please keep this manual in a safe place for future reference MEET BRID &...
- Page 4 BRID literally vaporizes: VOC, Carbon Monoxide, NOx, organic odors, formaldehyde, bacteria, mold spores and more. BRID has a modular and compact design that makes it the perfect solution for every indoor environment. By using the latest nanotechnology, BRID has set a new standard for air purification devices.
-
Page 5: Connect The Power Cord
Q U I C K S TA R T 1. UNPACK BRID 2. PLACE FILTER/S Carefully extract BRID and all its components from Remove the top module and place the ceramic filter the cardboard box. Take extra care when handling in the dedicated slot of the power module*. - Page 6 BRID is for indoor use only. overheats. Do not insert foreign objects or your fingers Do not use BRID on unstable surfaces or inside the grill or moving parts. Please next to precarious objects. This may cause observe extreme caution when using the air injuries if it falls over.
- Page 7 Do not handle the plug or the appliance with wet hands • Make sure the plug is fully inserted into the base • Stop using BRID and unplug it if there are any abnormalities or malfunctions • Unplug from socket if not in use for long periods •...
- Page 8 M T H E W A For maximum performance and reliability, place BRID at a suitable distance from the wall. Do not obstruct BRID’s fan located at the base of the product. It is important not to block the airflow.
-
Page 9: Master Reset
BRID adjusts its cleaning cycles to the pollution level of the room thanks to its smart sensors. When the fan is not in motion BRID’s light will turn on and off every 5 minutes to let you know the device is working properly. - Page 10 C A R E A N D M A I N T E N A N C E Caring for your BRID is an important part of achieving optimal performance. It’s simple and easy: Before cleaning your unit, make sure to unplug it.
- Page 11 H O W T O C L E A N / R E P L A C E T H E N W F P R E - F I LT E R The NWF pre-filter should be cleaned/replaced according to the level of dust in the room, approximately once every 3 months or once every 2 months if living with pets.
- Page 12 H O W T O C L E A N T H E C E R A M I C F I LT E R S For best results, clean the ceramic filters at least once every 4 months. Unplug BRID and unscrew the Gently remove the top unit and Safely remove the ceramic filter safety rod if present.
- Page 13 T E C H N I C A L S P E C I F I C AT I O N S B R I D B R I D X L B R I D X X L 25x25x24 cm 25x25x28 cm 25x25x33 cm DIMENSIONS...
- Page 14 Carbon Monoxide sensor and alarm. If the Carbon Monoxide concentration in your room exceeds a dangerous level BRID will warn you with a buzzing sound. You can always monitor the Carbon Monoxide concentration through BRID’s companion app.
- Page 15 Is the pre-filter dirty? • Are you in Smart Mode? Even when not operating, BRID monitors the pollution levels in your environment T H E FA N M A K E S A L O U D N O I S E •...
- Page 16 / brid@atellani.com...
Need help?
Do you have a question about the BRID and is the answer not in the manual?
Questions and answers