Vetter VSL 12 Manual

Low pressure lifting bags 0.5 bar / 7.25 psi, medium pressure lifting bags 1 bar / 14.5 psi, low pressure bags 0.5 bar / 7.25 psi

Advertisement

Quick Links

Vetter Low Pressure Lifting Bags 0.5 bar / 7.25 psi
Vetter Medium Pressure Lifting Bags 1 bar / 14.5 psi
Vetter Low Pressure Bags 0.5 bar / 7.25 psi
List of contents
Introduction ..................... 14
Safety instructions ........... 14
deadman controller ......... 16
controller ........................ 16
pressed-air sources ......... 17
Practical tips ................... 18
Troubleshooting .............. 18
servicing ......................... 19
Recurrent tests ............... 19
- Performance ................ 19
- Tables ......................... 21
- Low Pressure Lifting
Bags ........................... 22
- Medium Pressure Lifting
Bags ........................... 23
conformity ....................... 25
14

Introduction

Lifting bags may only be
operated with compressed
air, never with flammable or
aggressive gases. The
lifting bags may only be
filled using original Vetter
fittings. Check the equip-
ment before and after every
use for perfect working
order. Pay attention to DIN
7716 if stored for longer
periods of time. We will be
happy to supply an excerpt
from this standard.

Safety instructions

Use only Vetter original
fittings. Only these
fittings have been
tested in the works in
accordance with the
Pressure Vessel
Legislation.
Please check the
perfect condition of the
equipment and lifting
bags before and after
use.
Insert lifting bags at
suitable points so that at
least 75 % of the bag's
surface is beneath the
load.
Avoid angles larger than
30° (relationship
between base and load
to be lifted). The bag
could be catapulted out
of the gap. Create a
parallel base to the load
to be lifted whenever
possible using a sturdy
substructure.
Never place more than
two bags on top of one
another.
Secure load against
slipping. Keep inserting

Advertisement

Table of Contents
loading

Summary of Contents for Vetter VSL 12

  • Page 1: Table Of Contents

    Vetter Low Pressure Lifting Bags 0.5 bar / 7.25 psi Vetter Medium Pressure Lifting Bags 1 bar / 14.5 psi Vetter Low Pressure Bags 0.5 bar / 7.25 psi List of contents Introduction Safety instructions Introduction ..... 14 Lifting bags may only be •...
  • Page 2: Operating With Com- Pressed-Air Cylinders

    props the higher the • Protect bags against Operating with com- lifting height. flying sparks during pressed-air cylinders welding and cutting • If a substructure is used work. Connect pressure regulator always ensure that this with T-screw to com- is stable and firm. The •...
  • Page 3: Operating Low Pressure Lifting Bags With Dual Deadman Controller

    Vetter Low Pressure Lifting Bags 0.5 bar / 7.25 psi Vetter Medium Pressure Lifting Bags 1 bar / 14.5 psi Vetter Low Pressure Bags 0.5 bar / 7.25 psi Operating Low Pressure 7.25 psi or 1 bar / 14.5 psi.
  • Page 4: Operating With Other Compressed-Air Sources

    Open the handwheel (3) on or fault, find the cause and Operating with other the Vetter pressure regula- remedy. compressed-air sources tor. The max. tolerance for Vetter adaptor sets are Open the ball valve (6) to opening and closing the...
  • Page 5: Practical Tips

    Vetter Low Pressure Lifting Bags 0.5 bar / 7.25 psi Vetter Medium Pressure Lifting Bags 1 bar / 14.5 psi Vetter Low Pressure Bags 0.5 bar / 7.25 psi • Truck tyre valve (19). Practical tips placement of the lifting...
  • Page 6: Maintenance And Servicing

    Vetter Lifting Bags 0.5 bar / d) Apply a thin layer of complete and none are 7.25 psi are subjected to a special adhesive on the damaged.
  • Page 7 Vetter Low Pressure Lifting Bags 0.5 bar / 7.25 psi Vetter Medium Pressure Lifting Bags 1 bar / 14.5 psi Vetter Low Pressure Bags 0.5 bar / 7.25 psi other damage. Lifting bags In accordance with the are made of neoprene- Pressure Vessel Legislation coated fabric.
  • Page 8: Tables

    Table of recurrent tests Time Type of test Tester Basis Interval Before initial Acceptance inspection Work’s tester Pressure Vessel Legislation § 9 commissioning in manufacturer’s works After receipt Check on delivery Qualified tester DIN 14 152, Part 1, Item 5.2 by the user After every Visual and functional...
  • Page 9: Technical Data

    Vetter Low Pressure Lifting Bags 0.5 bar / 7.25 psi Vetter Medium Pressure Lifting Bags 1 bar / 14.5 psi Vetter Low Pressure Bags 0.5 bar / 7.25 psi Technical data Vetter Low Pressure Lifting Bags 0.5 bar / 7.25 psi...
  • Page 10: Bags

    Vetter Medium Pressure Lifting Bags 1.0 bar / 14.5 psi for export only Model VSM 24 VSM 14 VSM 10 VSM 6 Type 1/230 1/130 1/90 1/60 DIN-code* Product No.: complete set 311 00 000 312 00 000 313 00 000 314 00 000 Product No.: inidividual bag...
  • Page 11: Low Pressure Bags

    Vetter Low Pressure Lifting Bags 0.5 bar / 7.25 psi Vetter Medium Pressure Lifting Bags 1 bar / 14.5 psi Vetter Low Pressure Bags 0.5 bar / 7.25 psi Vetter Low Pressure Bags 0.5 bar / 7.25 psi * Type / Model...
  • Page 12: Ec Declaration Of Conformity

    EC Declaration of Conformity in the intendment of the EC Machine Directive 89 / 392 / EEC LH30 S LH50 S Manfred Vetter GmbH & Comp. 11805000 11806000 Blatzheimer Strasse 10-12 31.07 50.72 D-53909 Zülpich 3107 5072 hereby declare that the lifting bags 31.07...

This manual is also suitable for:

Vsl 7Vsl 5Vsl 3

Table of Contents