Page 2
Welcome to the Royales family. Thanks for choosing us for your wireless system, we hope you enjoy your experience and newfound freedom. With a high sound quality (48KHz), low latency(2ms) and extended signal operating range (up to 50 meters) we know that you will enjoy using it.
Page 3
PRODUCT INTRODUCTION TRANSMITTER 1) Signal in – to connect the transmitter to the instrument 2) 280° rotating head, will fit most instruments and pedalboards etc 3) USB port for charging 4) LED status indicating light Red light- Battery is running out or system is charging Green light- Device is paired and in working status Flashing: Pairing between transmitter and receiver, it will stop flashing once paired 5) Pairing key: a long press to enter pairing status and a short press to finish pairing...
Page 4
PRODUCT INFORMATION RECIEVER 1) Signal out –connect the reciever to amplifier or pedal etc 2) 280° rotating head, will fit most instruments and pedalboards etc 3) USB port for charging 4) LED status indicating light Red light- Battery is running out or system is charging Green light- Device is paired and in working status Flashing: Pairing between transmitter and receiver, it will stop flashing once paired 5) Key without function, reserved for future use...
Page 5
INSTRUCTIONS Plug the transmitter in to the instrument, then plug the receiver into the amplifier or pedal input port. Power on the transmitter and receiver, the transmitters light will turn green where the receivers light will stay off- this means you need to pair them. ...
Page 6
FREQUENTLY ASKED QUESTIONS 1. Q: The device cannot be powered on and doesn’t work A: if the device has been unused for long periods of time or was powered off on low battery it enters protection mode, it needs to be charged to activate the battery 2.
Need help?
Do you have a question about the Royales and is the answer not in the manual?
Questions and answers