Problem And Troubleshooting Guide - Toshiba MV13P3 Owner's Manual

Television/vcr combination
Hide thumbs Also See for MV13P3:
Table of Contents

Advertisement

PROBLEM AND TROUBLESHOOTING GUIDE

Check the following chart before requesting service.
SYMPTOM
POWER
No power.
Although the power is on,
the TV/VCR does not
operate.
TV BROADCAST RECEPTION
Poor or no picture.
Poor or no color.
Picture wobbles or drifts.
No CABLE reception.
No reception above
channel 13.
Poor or no sound.
50
5L80301C P44-BACK
CAUSE
The AC power cord is not connected.
Cassette is not inserted.
TIMER REC buttons are depressed.
TV station experiencing problems.
Picture control is not adjusted.
Possible local interference.
Antenna (CABLE) connector is not
connected or possible local
interference.
TV station experiencing problems.
Picture control is not adjusted.
Possible local interference.
Antenna (CABLE) connector is not
connected or possible local
interference.
TV station experiencing problems.
Antenna (CABLE) connector is not
connected or possible local
interference.
Cable TV channel is scrambled.
CABLE connector is not connected.
TV/CABLE selection is set to "TV".
Cable TV service interrupted.
TV/CABLE selection is not set to the
appropriate position.
UHF antenna is not connected.
TV station experiencing problems.
Antenna (CABLE) connector is not
connected or possible local
interference.
Possible local interference.
MUTE button is depressed.
50
POSSIBLE SOLUTION
Connect the AC power cord to the
AC outlet.
Insert a video cassette.
Press the TIMER REC buttons.
Try another channel.
Check picture control adjustments.
Check for source of reception
disturbance.
Check CABLE connection or VHF/
UHF antenna, reposition or rotate
antenna.
Try another channel.
Check picture control adjustments.
Check for source of reception
disturbance.
Check CABLE connection or VHF/
UHF antenna, reposition or rotate
antenna.
Try another channel.
Check CABLE connection or VHF/
UHF antenna, reposition or rotate
antenna.
Try another channel.
Check all CABLE connections.
Set the TV/CABLE selection to
"CABLE".
Contact your Cable TV company.
Make sure TV/CABLE selection is
in the appropriate position.
Check UHF antenna.
Try another channel.
Check CABLE connection or VHF/
UHF antenna, reposition or rotate
antenna.
Check for source of reception
disturbance.
Check that MUTE button has not
been pressed.
20/4/04, 16:29
PAGE
7
33
43
18
31, 32
49
11, 12
18
31, 32
49
11, 12
18
11, 12
18
12
22
12
22
11
18
11, 12
49
19

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents