Advertisement
Wall Mount Folding Keyboard Installation Instructions (continued)
8.
Insert the cable and fitting through the hole in the left hand wall bracket. Tightly reinstall the nut from the rear. Push
the cable through as far as it will go, then tighten the cable gland nut from the front.
IMPORTANT!
FAILURE TO FULLY TIGHTEN EITHER NUT WILL COMPROMISE THE WATERTIGHT SEAL ON THE PANEL.
NUT
PANEL
CABLE
FIGURE 8 – TOP AND FRONT VIEWS
CABLE GLAND
NUT
CABLE
FIGURE 9 – TOP AND FRONT VIEWS
FIGURE 10 – SIDE VIEW SHOWING 4 POSITIONS
99109A • December 16, 2019 • www.HopeIndustrial.com • International: +1 (678) 762-9790 • UK: +44 (0) 20 7193 2618 • © 2020 Hope Industrial Systems, Inc. • Page 4 of 4
LIFT TO DISENGAGE FROM LOCK UP POSITION
KEYBOARD HAS 4 POSITIONS:
LOCK UP
TYPE UP/FLAT
TYPE DOWN
LOCK DOWN
PULL TO DISENGAGE FROM LOCK DOWN POSITION
Advertisement
