Advertisement
5. Maintenance
warninG! disconnect wrench from air supply before changing accessories, servicing or performing maintenance. replace or repair
‰
damaged parts. use genuine parts only. non-authorised parts may be dangerous and will invalidate the warranty.
5.1.
if the air system does not have an oiler, lubricate the air wrench daily with a few drops of sealey air tool oil dripped into the air inlet
to prolong its life.
5.2.
clean the wrench after use. DO nOt use worn, or damaged sockets.
5.3.
loss of power or erratic action may be due to the following:
a) excessive drain on the air line. moisture or restriction in the air pipe. incorrect size or type of hose connectors. to remedy check the
air supply and follow instructions.
b) Grit or gum deposits in the wrench may also reduce performance. if your model has an air strainer (located in the area of the air inlet),
remove the strainer and clean it. flush the wrench out with gum solvent oil or an equal mixture of sAe no 10 oil and paraffin.
Allow to dry before use.
5.4.
for a full service, contact your local sealey service agent.
5.5.
When not in use, disconnect from air supply, clean wrench and store in a safe, dry, childproof location.
5.6.
Periodically lubricate ratchet yoke drive shaft. this will reduce friction and increase the longevity of the tool.
parts support is available for this product. to obtain a parts listing and/or diagram,
please log on to www.sealey.co.uk, email sales@sealey.co.uk or telephone 01284 757500.
environmental protection
recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be
sorted, taken to a recycling centre and disposed of in a manner which is compatible with the environment.
When the product becomes completely unserviceable and requires disposal, drain off any fluids (if applicable)
into approved containers and dispose of the product and the fluids according to local regulations.
NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
iMpOrtant: no liability is accepted for incorrect use of this product.
warranty: Guarantee is 12 months from purchase date, proof of which will be required for any claim.
© Jack sealey limited
sole uK distributor, sealey Group.
Kempson Way, suffolk Business Park,
Bury st. edmunds, suffolk.
iP32 7Ar
Original Language Version
01284 757500
01284 703534
GsA20,GsA20Kit,GsA21,GsA21Kit - V2 | issue 1 15/03/17
fig.3
www.sealey.co.uk
sales@sealey.co.uk
Advertisement
