Advertisement
KFZ-Smartphone-Halterung
Modell Nr.: EA-965 A und EA-965 B
CAR SMARTPHONE HOLDER
WITH CAR ADAPTER CHOOSE FROM
A 2-POINT OR 3-POINT RETAINER
TECHNICAL DATA:
• With 3 functions: Car mobile phone holder, universal
car charger and USB cigarette lighter adapter
• Simple assembly and easy start-up
• Adjustable holder with gooseneck (approx. 7.87" (20 cm))
• Holder material: PC synthetics, gummed
• Gooseneck material: Carbon steel
• Holder can be flexibly adjusted
• USB charging function and overload protection
• Blue LED operating display
• Universal gummed 2-point holder for models with a
width of approx. 2.17" to 3.35" (5.5 cm to 8.5 cm)
• Universal gummed 3-point retainer for models with
a width of approx. 1.77" to 2.83" (4.5 to 7.2 cm) and
a height of approx. 4.33" to 5.31" (11 to 13.5 cm)
• Micro-fuse in the adapter: 250 V 2A Ø F 5 x 20
• Input voltage: 12 – 24 V
• 2 × USB port
• Output power:
⎓
Output A: 5 V
, 2.1 A
⎓
Output B: 5 V
, 1 A
• CHARGING CABLES ARE NOT INCLUDED IN THE PACK CONTENTS
• Box content: Car adapter, 2-point or 3-point holder
Start-up
• Insert the cigarette lighter adapter for the smartphone holder in the socket of the vehicle's
electrical system.
The blue power LED will light up.
• Place the smartphone in the holder and use a USB charging cable (not included in the pack
contents) to connect it with the jack in the cigarette lighter adapter.
• Align your device.
• If applicable, the vehicle ignition must be turned on so that the socket of the vehicle's electrical
system is operational.
Changing the micro-fuse
Take your smartphone out of the retainer and pull the USB charging cable out of the cigarette lighter
adapter.
Pull the cigarette lighter adapter out of the socket of the vehicle's electrical system.
Unscrew the contact tip off of the cigarette lighter adapter by turning the contact tip counterclock wise.
Remove the fuse and insert a new, undamaged fuse of the same type (see section "Technical data").
⎓
Advertisement
Table of Contents
Summary of Contents for Wachsmuth & Krogmann EA-965 A
- Page 1 KFZ-Smartphone-Halterung Modell Nr.: EA-965 A und EA-965 B CAR SMARTPHONE HOLDER WITH CAR ADAPTER CHOOSE FROM A 2-POINT OR 3-POINT RETAINER TECHNICAL DATA: • With 3 functions: Car mobile phone holder, universal car charger and USB cigarette lighter adapter • Simple assembly and easy start-up •...
- Page 2 Screw the contact tip back onto the cigarette lighter adapter. In so doing, make sure that the fuse enters into the contact tip. Safety notes Mount your smartphone holder so as not to obstruct the view of the road, vehicle controls, rear-view mirror or airbags.
Need help?
Do you have a question about the EA-965 A and is the answer not in the manual?
Questions and answers