Toshiba MD20FN3/R Owner's Manual page 41

Using the audio/video inputs
If you connect the TV/DVD to VCR, camcorder or TV game, you can select by pressing INPUT SELECT.
Press INPUT SELECT repeatedly to select the desired mode.
"LINE1", "LINE2" or TV channel will display on the screen for 4 seconds.
TV Channel
1. To connect the TV/DVD to a VCR
Press the INPUT SELECT to select the desired mode to use the TV as a monitor.
Operate your VCR as usual.
2. To connect the TV/DVD to a camcorder
To playback from the camcorder, connect the camcorder to the TV/DVD as shown.
Camcorder
3. To connect the TV/DVD to a TV Game
You can enjoy playing a TV game on the screen by adjusting to suitable brightness for your eyes.
1. Connect a TV Game
2. Press GAME during Power off. The TV/DVD turns on and the GAME screen appears.
Game timer function: After one hour the Game timer display will appear every 30
minutes for about 5 seconds showing how long the time has passed up to 4 hours.
NOTES:
• You can also change the TV screen to LINE2 by pressing INPUT SELECT. But this screen is normal.
• The TV/DVD can also be used as a display device for many video games. However, due to the wide variety of different
types of signal generated by these devices and subsequent hook-up variations required, they have not all been included
in the suggested connection diagrams. You'll need to consult each component's Owner's Manual for additional information.
LINE 1 LINE 2
(Back) (Front)
VCR
To Audio/Video
OUT
Audio/Video cable (not supplied)
To Audio/Video OUT
Audio/Video cable (not supplied)
To Audio/Video OUT
Audio/Video cable (not supplied)
NOTE:
In the DVD mode this key will not
operate.
Rear of TV/DVD
VIDEO IN
Front of TV/DVD
VIDEO IN
Front of TV/DVD
VIDEO IN
AUDIO IN (L)
AUDIO IN (R)
AUDIO IN (R)
AUDIO IN (L)
AUDIO IN (R)
AUDIO IN (L)
41
41