Advertisement
Quick Links
Advertisement
Summary of Contents for Acom CM-10
- Page 1 ASSEMBLING MANUAL CM - 10 Antenna Crank-up Mast 10 m...
-
Page 2: General Information
If assistance or service is needed, your local dealer should be contacted first. In the unlikely event you need further information, you may get in touch with ACOM OOD by fax, telephone, electron or ordinary mail: Fax (+359 2) 920 9656; telephone (+359 2) 920 9655; e-mail: acom@mail.orbitel.bg; ordinary mail: ACOM OOD, Blvd Nikola Mushanov 151, 1330 Sofia, Bulgaria. - Page 3 ACOM ships antenna masts in highly protected containers, but it cannot assure that mistreatment by shippers will not occur. If there is any such damage, notify your ACOM dealer immediately. Failure to do so may invalidate your warranty.
- Page 4 ACOM CM-10 Antenna Crank-up Mast lower the winch so that lower tube and the lifter get in the pivot at the mast base, and the rope of the winch gets into the lifter pulley. By means of the winch lift the lifter together with the lower tube until the fixing pins enter the fixing holes.
- Page 5 ACOM CM-10 Antenna Crank-up Mast - Inspection of the framework’s base and all anchoring elements. - Check-up of the grounding circuit electric and mechanic parameters. Irregularities must also be sought for in the following cases: - After experiencing extreme conditions.
Need help?
Do you have a question about the CM-10 and is the answer not in the manual?
Questions and answers