The use of con- tent takes place at the user‘s own risk. Therefore we - the Cete Automotive GmbH - assume no liability and responsibility for damages and defects, which arise from operation or incorrect handling and maintenance.
UN/ECE R10 (radio interference of motor vehicles) • 2002/95/EG (RoHS-directives) • 2002/96/EG (WEEE-directives) You can get the completed declaration of conformity on request. Sent us an email to: info@Active-Sound.eu Cete Automotive GmbH - Elmshorner Straße 33 - 25358 Horst - info@Active-Sound.eu...
Step 4) Active Sound Gateway Now plug the Active Sound Gatway between the control unit and the harness. For the reinstallation please carry out all steps backwards. Cete Automotive GmbH - Elmshorner Straße 33 - 25358 Horst - info@Active-Sound.eu...
The place of installation is located in the (Rear-) trunk of the vehicle on the right side(see figure). Step 2) Place of installation (A6 Avant) Remove the panel at the right side of your (Rear-) trunk. Cete Automotive GmbH - Elmshorner Straße 33 - 25358 Horst - info@Active-Sound.eu...
(A6 / A6 Avant / A7) Now plug the Active Sound Gatway between the control unit and the harness. For the reinstallation please carry out all steps backwards. Cete Automotive GmbH - Elmshorner Straße 33 - 25358 Horst - info@Active-Sound.eu...
In the next step loosen the screws of the holder. Therefor you have to unscrew two screws out of both holders. Step 4) Place of installation Remove the cover at the left side (see picture). Cete Automotive GmbH - Elmshorner Straße 33 - 25358 Horst - info@Active-Sound.eu...
Step 7) Active Sound Gateway Now plug the Active Sound Gatway between the control unit and the harness. For the reinstallation please carry out all steps backwards. Cete Automotive GmbH - Elmshorner Straße 33 - 25358 Horst - info@Active-Sound.eu...