ETI EXM Series Installation Instruction

Optional Bracket
Electromagnetic Lock Installation Instruction
EXM SERIES
Bracket installation is according to door swing direction and door frame type ,e.g . narrow frame door, frame less glass door , in swing door, etc .
Regular Installation
(outswing door)
L-bracket for narrow
frame (optional}
Regular Installation
Template
Armature Plate
Hollow Metal Door
o,tdoo,~
1/2 " 5/16 "
Fold the mounting template 90·.
Place the template to the proper
position of the door and frame . Mark
the hole positions of the template on
the door and frame .
Drill the holes according to the
marks .
Please install the armature plate as
illustrated here . (Dimensions of the
holes are depending on the door
types as illustrated below .)
Drill
a 5/16 " hole
through door ,
on closing side Outdoor
enlarge to 1/2"
by a sex nut bolt
on the opening
side .
Solid Door
1/2" 5/16"
LI-bracket for frameless
glass door (optional}
®
®
LZ-bracket for inswing
door (optional}
INSTALLATION WITH
MOUNTING PLATE
Fasten the mounting plate with the
mounting screws . The position of the
mounting plate should be adjustable .
INSTALLATION
DIRECT TO DOOR JAM
t
Connect the power and test the unit.
Insert the anti-tamper caps into the
holes of mounting screws.
I
Butt Splice(IDC) Connector
Using crimper or pliers and pressing the header of connector
down to even position .