Recalling Stored Radio Stations; Selecting The Seek-Tuning Sensitivity; Switching From Stereo To Mono Fm Only) - Blaupunkt RADIOPHONE / CASSETTE TCM 127 Operating Instructions Manual

Recalling stored radio stations

You can recall any stored radio station at
the touch of a button.
• Press BND/TS repeatedly until the de-
sired waveband appears in the display.
• Press the corresponding selection but-
ton briefly.
If you wish to recall a station stored on a
two-digit preset (e.g. preset 19) first press 1
and then 9 within the next 2 seconds.
Selecting the seek-tuning sensi-
tivity
You can alter the automatic seek-tuning
sensitivity.
If "lo" is displayed, the radio will only pick up
strong, local stations.
If "lo" is switched off, the radio will also pick
up weaker, more distant stations.
To switch the seek tuning sensitivity:
• Press .
*
The sensitivity level can be selected sepa-
rately for both modes. (Please refer to the
section on "Programming with DSC – DX-
LEVEL / LO-LEVEL").
82
Switching from stereo to mono
(FM only)
Every time the radio is switched on, stereo
playback will be activated automatically.
The unit will gradually switch to mono if the
reception deteriorates beyond a certain
point.