Summary of Contents for Telcoma TANGO PRG
- Page 1 TELCOMA S.R.L. VIA L. Manzoni 11 31015 Conegliano (TREVISO) ITALY PH. ++39 0438 451099 FAX ++39 0438 451102 INSTRUCTION HANDBOOK PROGRAMMER TANGO PRG TANGO N VERSION FOR TYPE TRANSMITTERS...
- Page 2 The red “Transfer” led on the front panel of the programmer now comes on, showing the start of programming. Rest the transmitter in the shape outlined in the TANGO PRG and press a transmitter button until the writing CODE OK appears for a moment on the display.
- Page 3 The red “Transfer” led on the front panel of the programmer now comes on, showing the start of erasure. Rest the transmitter in the shape outlined in the TANGO PRG and press a transmitter button until the writing CANC OK appears for a moment on the display.
- Page 4 INSERTING A CODE In the memory of the receiver A code may be inserted into the memory of a TANGO receiver without going through the self-memorising operation by transmitter. Proceed with programming, e.g. of the code 5678, as follows: Remove the memory from the receiver (see TANGO instructions) and plug it into the SLAVE base of the card provided.
- Page 5 Return to main menu. RECHARGEABLE BATTERY As the TANGO PRG programmer may also be used outdoors, it comes with an internal rechargeable battery. The state of the battery is shown on the display; when the battery is discharged the symbol appears, recommending use of the programmer with external power supply.
Need help?
Do you have a question about the TANGO PRG and is the answer not in the manual?
Questions and answers