Advertisement
Slide Warmer
Model XH-2001
Model XH-2002
Operating Manual
Before using this product, please read this manual carefully to learn about the available features
to obtain the best results of this equipment.
Warning: To prevent fire or shock hazard, do not expose this unit to rain or moisture. Unless
labeled otherwise, this equipment should be used with AC 120V, 60Hz in the USA or Canada.
220V, 50Hz available as Model No. XH-2001-220 or XH-2002-220
Caution: No user-serviceable parts inside. Refer servicing to qualified service personnel.
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for premiere XH-2001
Summary of Contents for premiere XH-2001
- Page 1 Warning: To prevent fire or shock hazard, do not expose this unit to rain or moisture. Unless labeled otherwise, this equipment should be used with AC 120V, 60Hz in the USA or Canada. 220V, 50Hz available as Model No. XH-2001-220 or XH-2002-220 Caution: No user-serviceable parts inside. Refer servicing to qualified service personnel.
- Page 2 1.1 Table of Contents Section • Table of Contents Page 1 • Safety Page 2 • Contents/Specifications Page 3 • Control Panel/Setup Page 4 • Operation Page 5 • Troubleshooting Page 5 - 6 • Warranty Page 7...
- Page 3 2.1 Safety 1. Handle this device with the same care as any heating device: • Do not touch the heating surface until it is cool • Do not turn on the heating surface if it is empty 2. Be sure to place the device on a flat, level, heat resistant surface free from any debris. Also, place it away from any edges where it could be accidentally pushed off.
- Page 4 Capacity Approx. 66 slides Approx. 23 slides Power 200 Watts 100 Watts Net Weight 19 lbs. 7 lbs. 110V, 60Hz Voltage 220V, 50Hz (Models XH-2001-220 and XH-2001-220) Room temperature to 75˚ C; ±2˚ C Temperature Quality Assured Firm ISO 9002...
- Page 5 4.1 Control Panel 1) Temperature Control Buttons 4) Heating indicator lamp 2) Temperature Set Button 3) LED Temperature Display 1. ▲▼ : Temperature control buttons 2. ○: Temperature set button 3. LED temperature display 4. ●: Heat indicator lamp 4.2 Setup 1.
- Page 6 5.1 Operation 1. Plug the Slide Warmer into an electrical outlet and turn on the power switch on the side of the machine. The LED temperature display will turn on letting you know the machine is on and is working. 2.
- Page 7 For example, the measured average temperature of the heating surface is 30℃, but the LED temperature display shows 25℃. Use the “▲” button to add 5℃ (the difference in temperature values). Then when you exit the settings selections (step 5) the LED temperature display will read 30℃.
Need help?
Do you have a question about the XH-2001 and is the answer not in the manual?
Questions and answers