HSS Hire 40962 Operating And Safety Manual

assume you have the wrong equipment for the job.
Contact you local HSS Hire Shop for advice.
Handle the equipment with care. Avoid dropping it,
knocking it or otherwise exposing it to damage.
Never expose the equipment to excessive
moisture, dust or dangerous/corrosive chemicals.
Keep the equipment clean - you will find this less of a
chore if you clean it regularly, rather than wait until the
end of the hire period.
When not in use, store the equipment somewhere
clean, dry and safe from unauthorised users and
from thieves.

FINISHING OFF

Switch OFF the equipment being powered
followed by the unit itself. Switch OFF the power
supply and disconnect the unit.
Neatly coil its cable then give the unit a final clean
up ready for return, to your local HSS Hire Shop.
Contact your local
0845 728 2828
...any comments?
If you have any suggestions to enable us to improve
the information within this guide please fax your
comments or write to the Product Manager at the
address below
Fax: 020 8687 5001
©HSS Hire Service Group Plc 1999 No. 936/01
Group Office: 25 Willow Lane, Mitcham, Surrey CR4 4TS
Web Site: http://www.hss.co.uk
Operating & Safety Guide 936
Hire Shops
Power Surge
Protector
A portable unit designed to protect
sensitive electronic equipment from
power surges and insufficient
voltage.
Code 40962