Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Summary of Contents for CLIMASTAR SILICIUM HYBRID
- Page 1 USER’S GUIDE SILICIUM HYBRID INVERTER...
- Page 3 Congratulations on your purchase of your SILICIUM HYBRID INVERTER UNIT!! The product you have just purchased has undergone numerous tests and inspections to guarantee the highest quality. We hope it will give you entire satisfaction. We are sure you will be happy with it because it represents the state of the art in the technology of home air conditioning.
- Page 4 2.1 Display The display also shows status and eventual alarms through the 8 specific symbols: Automatic function selected Active cooling Silent function selected Alarm signal Maximum ventilation speed selected Night function selected Heating element (blinking light) Active heating heating element activated (fixed light) 2.2 Keyboard The various functions are set with the 8 backlit keys Night function : ventilation speed is limited to a very contained value, and the...
- Page 5 2.5 Heating / cooling operation mode setting OPERATION DISPLAY Keep Heating / Cooling pressed down for about 2 seconds to switch the operation mode between heating and cooling, shown through the 2 active heating or active cooling symbols which appear. When heating, the symbol is switched on when the set point is higher than the environment temperature;...
-
Page 6: Night Function
2.8 Automatic function OPERATION DISPLAY Keep the AUTO key pressed. Activation of the function is indicated by the relative symbol appearing on the display. Ventilation speed adjustment will occur automatically between a minimum and a maximum value, according to the effective distance of the environment temperature from the set point, based on a PI type algorithm. - Page 7 3.1 Cleaning the outside - Before every cleaning and maintenance intervention, disconnect the appliance from the mains by switching off the master switch. - Wait until the parts have cooled down to avoid the risk of burns. - Do not use abrasive sponges or abrasive or corrosive detergents to avoid damaging the painted surfaces.
-
Page 8: Troubleshooting
- It is forbidden to use the unit without the net filters. - The appliance is fitted with a safety switch that prevents the operation of the cooler with the mobile panel missing or out of position. - After finishing the cleaning of the filter, check that the panel is mounted correctly. Insert the two lugs into the special slots, turn it and hook it up with a slight tap on the upper part. - Page 9 4.2 Table of anomalies and remedies The interventions must be carried out by a qualified installer or by a specialized service centre. Effect Cause Remedy A delayed activation of the The circuit valve needs some time to open ventilation respect to the new and as a result the hot or cold water takes Wait for 2 or 3 minutes to open the circuit temperature or function...
- Page 10 5. GUARANTEE CLIMASTAR guarantees that in the moment of its purchase the product is free of any defect in the materials and in the work force (limited guarantee). CLIMASTAR offers a commercial and voluntary guaran- tee; conditions included are similar to those of the legal guarantee, being CLIMASTAR responsible for the non-conformities arisen in the terms and conditions mentioned below.
- Page 12 CLIMASTAR GLOBAL COMPANY S.L. Carretera AS-266 OVIEDO-PORCEYO/ Km.7 Pruvia 33192 - Llanera (Asturias)- SPAIN Tel: +34 985 66 80 80 / Fax: +34 985 264 751 www.climastar.es HYBRID INVERTER User Rev. 270120...
Need help?
Do you have a question about the SILICIUM HYBRID and is the answer not in the manual?
Questions and answers