Advertisement
Quick Links
WARNING
The installation must only be performed by a licensed electrician.
l
To prevent death, injury or damage to property, this product must be installed in accordance to National
l
Electrical Code (NFPA70) in the US or Canadian Electrical Code (CSA22.1) in Canada.
Disconnect power before installing the product or servicing it.
l
Wait until fixture has cooled down before installing or servicing the fixture.
l
MIN. 90°C SUPPLY CONDUCTORS
l
MODEL NUMBERS
This installation instructions covers the following products:
Power Supplies
1. 96W Power Unit: PUC-UNV1-3570 or PUC-UNV2-3570
2. 100W Power Unit PUC-UNV1-4100 or PUC-UNV1-4100DM or PUC-UNV2-4100DM
3. 192W Power Unit: PUC-UNV1-7140 or PUC-UNV2-7140
4. 200W power Unit: PUC-UNV1-8200 or PUC-UNV1-8200DM or PUC-UNV2-8200DM
Luminaires
1. CNP1-50 Series Luminaire
2. CNP2-50 Series Luminaire
3. CNP3-50 Series Luminaire
4. CNP4-50 Series Luminaire
BOX CONTENTS
Mounting Plate Assembly
Wire Harness/Cover
Assembly
US LED
| 6807 PORTWEST DR | HOUSTON, TX 77024 | T 866 972 9191 | F 713 972 9393 | info@usled.com | www.usled.com
INSTALLATION GUIDE
CNPx-50
Tools Needed
1. 4" Hole Saw
2. #2 Phillips Screw Driver
3. ¼" Hex Driver
CanopyStar Fixture
LED Driver with Mounting Bracket
sold separately not included in
the box
Updated 04.20.18
Page 1
#44-000017
Advertisement
Summary of Contents for CANOPY STAR CNP-50 Series
- Page 1 INSTALLATION GUIDE CNPx-50 WARNING The installation must only be performed by a licensed electrician. To prevent death, injury or damage to property, this product must be installed in accordance to National Electrical Code (NFPA70) in the US or Canadian Electrical Code (CSA22.1) in Canada. Disconnect power before installing the product or servicing it.
-
Page 2: Installation Instructions
INSTALLATION GUIDE CNPx-50 INSTALLATION INSTRUCTIONS Using 4” hole saw, cut hole in canopy where fixture is to be mounted. Hole location needs to be centered be- tween canopy ribs to allow wire harness/cover assembly to fit. Install mounting plate assembly by folding mounting tabs in, insert mounting plate into 4” hole and secure by tightening mounting tab screws using #2 Phillips screw driver. See Figures 1 and 2. Mounting tab screws 4”... - Page 3 INSTALLATION GUIDE CNPx-50 INSTALLATION INSTRUCTIONS Route wires through center of mounting plate assembly. See Figure 5. Take wire harness assembly and make power connections using approved electrical connector. See wire diagrams. FIG 5 FIG 6 Pack excess wire in center of mounting plate assembly and mount cover using #10 sealing weather resistant screws supplied.
- Page 4 INSTALLATION GUIDE CNPx-50 INSTALLATION INSTRUCTIONS - DRIVER BOX Turn off main power. Secure driver box assembly to mounting bracket by tightening mounting screws using ¼” hex driver. See Figure 9. Secure mounting bracket to any vertical wall using #10 sheet metal screws supplied. Insure location allows wire harness to reach low voltage side of power supply box.
-
Page 5: Wiring Diagrams
INSTALLATION GUIDE CNPx-50 WIRING DIAGRAMS FOR CNP1-50 LUMINAIRES WITH TRANSFORMER WITHOUT TRANSFORMER Page 5 #44-000017 Updated 04.20.18 US LED | 6807 PORTWEST DR | HOUSTON, TX 77024 | T 866 972 9191 | F 713 972 9393 | info@usled.com | www.usled.com... - Page 6 INSTALLATION GUIDE CNPx-50 WIRING DIAGRAMS FOR CNP2-50 LUMINAIRES WITH TRANSFORMER, 2 DRIVERS WITHOUT TRANSFORMER, 2 DRIVERS Page 6 #44-000017 Updated 04.20.18 US LED | 6807 PORTWEST DR | HOUSTON, TX 77024 | T 866 972 9191 | F 713 972 9393 | info@usled.com | www.usled.com...
- Page 7 INSTALLATION GUIDE CNPx-50 WIRING DIAGRAMS FOR CNP3-50 LUMINAIRES 120-277VAC INPUT VOLTAGE 347-480VAC INPUT VOLTAGE Page 7 #44-000017 Updated 04.20.18 US LED | 6807 PORTWEST DR | HOUSTON, TX 77024 | T 866 972 9191 | F 713 972 9393 | info@usled.com | www.usled.com...
- Page 8 INSTALLATION GUIDE CNPx-50 WIRING DIAGRAMS FOR CNP4-50 LUMINAIRES 120-277VAC INPUT VOLTAGE 347-480VAC INPUT VOLTAGE Page 8 #44-000017 Updated 04.20.18 US LED | 6807 PORTWEST DR | HOUSTON, TX 77024 | T 866 972 9191 | F 713 972 9393 | info@usled.com | www.usled.com...