Do you have a question about the Lincat UM50 and is the answer not in the manual?
Questions and answers
Summary of Contents for SEAL Lincat UM50
Page 1
User and Installation Instructions Seal Upright Heated Merchandisers UM50, UM50D, UMS50, UMS50D, UMO50, UMO50D, UMSO50, UMSO50D IS287 ECN3321...
Page 2
Dear Customer, Thank you for purchasing this Lincat product. This is just one of over 450 different items of catering equipment available which is constantly being extended and improved. Details are available from your local distributor or direct from us. Used for the purposes for which it is intended, and with careful maintenance as outlined in this User Guide, your Lincat product will give years of trouble free use.
SAFETY INSTRUCTIONS WARNING! Basic safety precautions, including the following, should be followed to reduce the risk of personal injury. Make sure you have read all of these instructions before switching on the unit. Keep this User Guide in a safe place for future reference for you and your staff.
PACK CONTENTS UM50 Upright Heated Merchandiser Water bath/lid (with cable and 13amp plug) User Guide 1 x rotary rack Guarantee card 1 x door assembly (see drawing) UM50D As UM50 but with 2 doors UMS50 As UM50, except static rack UMS50D As UMS50 but with 2 doors UMO50...
INSTALLATION Ensure the unit is installed on a sound, level work surface, which is heat resistant e.g. stainless steel or Formica ®. The unit’s external surfaces and base will become hot. You should inform your personnel and customers accordingly. NOTE For safety regulations, the plug must always be accessible.
OPERATING INSTRUCTIONS 1. Tem perature controller 2. Light S w itch 3. N eon Light 4. C able 5. Tem perature C ontroller (O ven) 6. O n/O ff S w itch (O ven) 7. N eon Light (O ven) UM50 Models To check operation of the unit, connect it to the electricity supply, switch on the light (2), then turn the temperature controller to setting 5.
CLEANING AND MAINTENANCE CLEANING Disconnect the unit from the electricity supply and ensure it is cool to touch before starting to clean. Use a mild detergent in hot water and a soft cloth. Do not use abrasive creams or scourers. Merchandiser Remove display rack ,base-plate and the water tray.
Page 11
SERVICE INFORMATION For help regarding the installation, maintenance and use of your Lincat equipment, please contact our Service Department: 01522 875520 All service work, other than routine cleaning should be carried out by one of our authorised service agents. We cannot accept responsibility for work carried out by other persons.
Need help?
Do you have a question about the Lincat UM50 and is the answer not in the manual?
Questions and answers