Advertisement
MS200/300/400 Hotplate Magnetic Stirrer
Setting the Stirring Time
MS series magnetic stirrer has a built-in timer that allows user to set the stirring time from 1 to 999 minutes.
1.
Press the
key to enter the setting mode, the display shows "000 min".
Time
2.
Press the or key to set the stirring time, press the
stirrer will stop the stirring simultaneously.
If you want to exit the setting, press the
Heating the Liquids
This section is applicable to MS300 and 400 magnetic stirrers.
1.
Insert the connector of temperature probe into the corresponding connector socket on the rear panel of stirrer.
2.
Place the temperature probe into the liquid.
3.
Press the
key and the or key to set the target temperature, press the
o
C
key to confirm. The timer automatically begins countdown until it gets to zero, the
Enter
key.
Exit
key to confirm. The stirrer is now begin heating.
Enter
2
Advertisement
