Summary of Contents for Autoaid Connected Car System 2G
- Page 1 Connected Car System 2G User Manual Installation Manual Specifications Safety Instructions Version 07/2019...
- Page 2 User Manual This user manual explains how to set up the autoaid Connected DO NOT disassemble the device. Opening the device Car System. Please read these instructions carefully prior to can result in damage to the hardware. If the device is plugging the dongle device into a vehicle.
- Page 3 Specifications Type Connected Car System 2G Dimensions (mm) 55.3 x 42.8 x 20.5 Weight (g) Processor ARM Cortex M4, 72 MHz, instant boot < 100ms Connectivity GSM/EDGE, Quad Band (850, 900, 1800, 1900 MHz) GPS receiver/GSM module Quectel MC60, Assisted GPS, GLONASS, Galileo and QZSS...
- Page 4 Full scale output range: ±2g; ±4g; ±6g ; ±8g ; ±16g 16 bit data output; low temperature drift; good linearity Internal power supply Supercapicators Audio output Internal buzzer Operating system autoaid Connect OS 2.1 Voltage 8 - 16 V Operating temperature -30 / +65°C Region Global...
- Page 5 To avoid any mechanical damage, it is advised to transport the device in an impact-proof packaging. autoaid is not responsible for any harm caused by wrong cables used for the connection between the car and the Do not plug in or remove the dongle device while driving. Before device.
- Page 6 Contact Information autoaid GmbH Helmholtzstr. 2-9 10587 Berlin Germany Phone: +49 (0)30 / 46 7777 50 Email: info@autoaid.de www.autoaid.de www.myautoaid.com Version 07/2019...
Need help?
Do you have a question about the Connected Car System 2G and is the answer not in the manual?
Questions and answers