Advertisement
General Information
Specifications
•
Power Source: DC 12V 500mA
•
Dimension: R160mm X H76mm
•
Weight: 470 w/o Power Adapter
Accessories
•
Buffing pads (One pair) (Pink)
•
Repairing pads (One pair) (Yellow)
•
Cleaning pads (One pair) (Blue)
•
Cleaning fluid (20cc bottle)
•
Repair fluid (10cc. bottle)
•
Mini brush
•
Power adapter
Caution
•
Do not press the power button when no disc is placed inside the unit
•
Refrain from operating the unit continuously for more than 30 minutes.
•
Refrain from adding more than 2 drops of the repair fluid onto the repair
pads.
Instruction
Make sure the power adapter is securely plugged to the main body's power socket.
Step 1
•
Buffing
Open the cover plate, place buffing pads (pink color) into the left and right
side of the mounting shaft
Insert the disc, then press power button.The
process will stop automatically after 2 to 3 minutes, open the cover plate and
retrieve the disc to go to Step 2.
Step 2
•
Repairing
Place the repair pads (yellow color) into the left and right side of the
mounting shaft
Add 2 small drops of repair fluid (10cc bottle) on the right
side, close the cover plate and press the power button
stops automatically, retrieve the disc to finish the process
buffing pad (pink color) with the included mini brush after use to maintain op-
timal performance
For deep scratch repair, repeat the procedure (Step 1&2)
until best results achieved
If the results of disc repairing aren't satisfactory,
repeat the procedure (Step 1&2) or replace the buffing and repair pads.
Step 3
•
Cleaning
Open the cover plate, place cleaning pads (blue color) into the left and right
side of the mounting shaft. Add 2 small drops of cleaning fluid (20cc bottle)
on the right side, and then insert the disc.Then press power button
process stops automatically, retrieve the disc to finish the process
satisfied with the result, repeat the procedure until best results achieved.
After the process
Always clean the
After the
If still not
Advertisement
