Arena Luci Design THOR LED 60x60 Elite Series User Manual

Ultra slim 60x60 led panel

Advertisement

Quick Links

This  unit  should  only  be  used  for  purpose  for 
which  it  has  been  intended  and  should  be 
installed  using  the  instructions  which  are 
provided.  Arena  Luci  cannot  be  held  liable  for 
damages to person, animals or objects as a result 
of improper, unreasonable and wrong usage.
This  instruction  manual  contains  important 
information  about  the  installation  and  use  of  the 
luminaire.  Please  read  and  follow  these 
instructions carefully.
The security of this device is guaranteed only with 
the  proper  use  of  the  following  instructions, 
therefore they must be kept carefully.
Never  install  the  device  in  locations  easily 
accessible by people who ignore the existence of 
this user's manual and safety instructions.
For  the  wiring  please  refer  to  enclosed  wiring 
diagrams.  If  in  the  diagrams  indicated  there 
should not be that of your application, contact the 
technical office.
Disconnect the unit from any power supply before 
attempting  any  operation  in  contact  or  inside  the 
unit, and when not in use.
It is essential that each device is correctly earthed 
and  that  electrical  installation  conforms  to  all 
relevant  standards.  Never  supply  the  unit  without 
the earth link.
Prior  to  connect  the  unit  to  the  mains  supply, 
check  the  output  voltage  fits  the  technical 
requirements on the label.
Never  let  the  power  cord  come  into  contact  with 
other cables.
Never  touch  the  electrical  contacts,  either  directly 
with  your  fingers,  or  indirectly  by  means  of  sharp 
or metal objects.
Please  note  that  as  part  of  Arena  Luci's  ongoing  commitment  to  continuous  product  development, 
specifications  are  subject  to  change  in  the  course  of  product  improvement  without  notice. Arena  Luci  is  not 
responsible for damages resulting from improper or different use than expected.
THOR LED 
60x60 Elite
User's manual
Ultra slim 60x60 LED panel

WARNINGS

Make sure that cables cannot cause trip hazard.
Do not attempt to dismantle and modify the unit.
Due  to  the  high  technological  level  of  this  unit, 
any  service  maintenance  should  be  performed  by 
specialised  operators.  Please  contact  your Arena 
Luci dealer for any operation.
Always ensure that the structure to which you are 
attaching the unit is secure and is able to support 
the weight of each unit.
Do  not  allow  contact  with  water  or  any  other 
fluids, or metallic objects (IP54/IP40).
Avoid installing the unit close to heat sources.
Never lean the power cord on hot unit surfaces.
Allowed  to  be  mounted  directly  on  inflammable 
surfaces.
Install the unit where it can be easily aerated.
Do  not  install  the  luminaire  on  deformed  or 
damaged ceilings.
The lighting apparatus must be used only with its 
protective plastic shield.
Contact  your  Arena  Luci  dealer  if  the  protective 
shield is visibly damaged to the point at which its 
effectiveness  is  diminished,  for  example  by 
becoming cracked or deeply scratched.
LED module is not replaceable.
Do  not  use  any  solvent  based  cleaning  agents. 
Use only a soft, dry anti­static cloth.
The  installation  of  LED  modules  (including  power 
supplies)  should  be  done  according  to  current 
technical  rules  and  regulations.  The  installation 
should be performed only by a qualified operator.
Avoid  contact  with  either  corrosive  agents  or 
humidity  and  moisture  on  delicate  elements: 
damages  from  corrosion  are  not  refunded  as 
component defects.
PNL2140i­WW
PNL2140i­NW

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the THOR LED 60x60 Elite Series and is the answer not in the manual?

Questions and answers

Summary of Contents for Arena Luci Design THOR LED 60x60 Elite Series

  • Page 1 THOR LED  60x60 Elite User's manual Ultra slim 60x60 LED panel PNL2140i­WW PNL2140i­NW WARNINGS This  unit  should  only  be  used  for  purpose  for  Make sure that cables cannot cause trip hazard. Do not attempt to dismantle and modify the unit. which  it  has  been  intended  and  should  be  Due  to  the  high  technological  level  of  this  unit,  installed  using  the  instructions  which  are  provided. ...
  • Page 2 PNL2140i BEFORE STARTING discrete  freedom  in  choosing  the  position  of  the  Remove  the  product  from  the  shipping  carton,  power supply. checking  that  all  the  components  supplied  are  Connect the power supply to the mains, using the  present  in  the  box.  Refer  to  the  following  packing  voltage  and  frequency  indicated  on  the  label  and  list ...
  • Page 3 USER'S MANUAL Fig. 01 ­ Connecting the LED panel ceiling  and  pull  the  cable  with  the  plug  connector  supply  unit  to  the  corresponding  socket  on  the  out from the hole in the false ceiling and connect it  panel power cable (Fig. 01). firmly  to  the  corresponding  socket  on  the  panel  Finalize the installation by inserting the LED panel  power  cable  (Fig.  01).  Insert  the  panel  inside  the  on  the  two  guides  of  the  frame  pushing  it  all  the  casing and fix it.
  • Page 4 PNL2140i TECHNICAL SPECIFICATIONS Power supply 220­240 V AC, 50/60 Hz Power consumption Sorce smd LED Color Temperature 3000K (­WW) ­ 4000K (­NW) Luminous flux 3878 lm (­WW) ­ 3955 lm (­NW) Beam aperture 120° Socket Terminal block Drilling hole 600x600 mm (APL1200) Material Aluminium + PC Color White frame Weight Body: 3.1 kg ­ Driver: 105 g Dimensions Body: 595x595x11 mm ­ Driver: 147x44x30 mm Insulation class Protection IP 54 (front) ­ IP 40 (rear) Ambient temperature ­25°C ... +45°C Suitable to be fitted on normally inflammable surfaces Applied standards PNL2140i EN­R0  |  10/2018 WARRANTY CONDITIONS 1194/2012,  Energy  label  2010/30/UE  ­  reg.  (UE)  The ...

This manual is also suitable for:

Thor led 60x60 elite pnl2140i­wwThor led 60x60 elite pnl2140i­nw

Table of Contents