Do you have a question about the CG800H Series and is the answer not in the manual?
Questions and answers
Summary of Contents for CityGrow CG800H Series
Page 1
Nothing contained in this publication should be viewed as an endorsement by CityGrow Energy Systems Limited of any particular manufacturer’s products.
Page 2
CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated “dangerous voltage”...
1. Introduction Thank you for choosing CityGrow’s product. CG800H Series is highly-functional, user- friendly and installation-friendly. It is specially designed for scene control. User can program the plate button for performing group control on different devices, including lights, curtains, air-conditioners, AV equipment and others.
Page 9
WARNING! Install in accordance to all national and local electrical codes. IMPORTANT! CityGrow® is not liable for any damage incurred with the misuse of the product. IMPORTANT! Pre-setup can only be done by a professional technician or...
STEP 3: Connect the main power cable to the Live and Neutral terminals of the CG101AD Mini Power Supply. Then connect the DC output wires of the CG101AD to the DC input of the CG800H Series product. For CG800H1-MD and CG800H4-MD...
Page 12
Retrofit the switch into the standard switch box and mount it on the wall by fastening the two screws at the rear of the switch box. STEP 5: Power up the main switch board, the LED indicators on CG800H Series product should be lightened up. Program the CG800H Series product by using HomeNet Planner 2 software to setup the function of the buttons on the control plate.
7. Operation instruction 7.1. CG800H1-MD and CG800H4-MD 1. Number 1 to 4 are buttons location. 2. 4 pcs of Lock for fixing the main unit onto the wall bracket. 3. Reset button 4. Program port Button number 1 to 4 can be programmed individually as power ON/OFF button, or Dim Up/Dim Down button or scene control button.
7.2. CG800HHB Doorbell Switch 1. Doorbell button. 2. MUR Make Up Room Indicator (For Hotel Only) 3. DND Do Not Disturb (For Hotel Only) 1. 4 pcs Locks to fix the main unit onto the wall bracket. 2. Reset button 3.
USB end of the CG101UTC cable. STEP 3 Plug the CG101UTC cable into the USB port of a PC which has been installed with CityGrow’s “HomeNET Planner 2” Software. STEP 4 Refer to the user manual of “HomeNET Planner 2” Software to program and set the address of the product.
9. Specification CG800H1-MD CG800H4-MD CG800HHB CG800HHB Description 8-Scene Twin Control Doorbell Switch Doorbell Switch 1-Scene Control Plate Plate For home use For Hotel use Power supply DC6V Powered by CG101AD external DC6V Mini Power Supply. Maximum number of devices can be programmed in scene setting Features...
Need help?
Do you have a question about the CG800H Series and is the answer not in the manual?
Questions and answers