Advertisement
Table of Contents
The MigStop is easily fitted. Please read the instructions carefully before installation.
Pack contains parts for two sash windows.
A 4 x Insert Unit
B
1 x Key
C 4 x Strike Plates
D 8 x Self Drilling Screws
E
4 x Barrel Unit
Important:
Consideration should be given before fitting to Egress windows. MigStop barrel is 20mm
long & 16mm in Diameter. This device must be fitted in a position that allows no more than a 100mm
restricted opening.
Ensure the sash is completely closed and locked before starting the installation.
1
Important!
Close and lock sash before starting installation.
Measure 100mm up from top of bottom sash
and mark window frame as shown above.
"Make It Once...Make It Mighton..."
MigStop
Installation Instructions
Parts List
A
Installation
B
E
2
100mm
Drill a 10mm diameter hole 18mm deep
on the marked positions on the top sash.
www.mightonproducts.com
C
D
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Summary of Contents for Mighton MigStop
- Page 1 4 x Barrel Unit Important: Consideration should be given before fitting to Egress windows. MigStop barrel is 20mm long & 16mm in Diameter. This device must be fitted in a position that allows no more than a 100mm restricted opening.
- Page 2 (B) provided. key provided (B). Clean the MigStop with a damp cloth. On a regular basis, ensure the device operates correctly. Consideration should be given before fitting to Egress windows. Please keep the key in a safe place.
Need help?
Do you have a question about the MigStop and is the answer not in the manual?
Questions and answers