Glasdon COMBO DELTA Instruction Leaflet

NOTE: Ensure that all relevant personnel read the points listed below and that a copy is passed on to staff involved
with the installation. Please also refer to the 'Manual Handling Operations Regulations 1992' during the handling of the

OPENING AND CLOSING THE UNIT:

A

INSERTING A SACK:

1. Hook the open sack over the steel sack band. Fig 4.
2. Lifting the sack band slightly, hook the remaining sack over the two rubber grips located on both
corners of the bin and replace the sack band to ensure a tight t. Fig 5.
TM
COMBO DELTA INSTRUCTION LEAFLET
product and materials used for installation.
Fig 1.
1. Lift both catches on either side of the door at the same time. Fig 1.
2. Lower the door out until it is resting on the retention straps. Fig 2.
3. To close push the door to until the catches click into place. Fig 3.
Fig 4.
Fig 2.
Fig 5.
P. 1
Fig 3.