The Control Setting Menu - Toshiba TDP-TW300 Owner's Manual

Using the menus (Continued)

■ The control setting menu

This menu sets items regarding wired LAN.
By this setting, you can transmit operation status messages from the projector to the
specified E-mail address.
Item
Wired LAN [ : Wired LAN setting]
Projector name: Enter a character string (0 to 64 characters)
using numeric keys of the remote control.
DHCP: Use
IP address: Enter a character string using numeric keys of the
remote control.
Subnet mask: Enter a character string using numeric keys of the
remote control.
Gateway: Enter a character string using numeric keys of the
remote control.
Confirm: [OK
[ : E-mail setting]
Email
Status notification: On
SMTP server: Enter a character string using numeric keys of the
remote control.
Port number: Enter a character string using numeric keys of the
remote control.
Destination address: Enter a character string using numeric
keys of the remote control.
Confirm: [OK
[ : PJLink setting]
PJLink
PJLink authentication: On
Password: Enter a character string (1 to 32 characters) using
numeric keys of the remote control.
Confirm: [OK
Detailed description
[Wired LAN]
<Projector name>: Setting a projector name helps you identify each of the
projectors that are connected to the network.
• You cannot set a projector name starting with ERR.
<DHCP>: When <DHCP> is set to [Use], an IP address is automatically assigned
to the projector by a DHCP server. In case of a network that an IP address cannot
be assigned automatically, set <DHCP> to [Not use].
When <DHCP> is set to [Not use], ask your network administrator for IP address,
subnet mask, and gateway, then set the following items manually:
<IP address>: This is a unique number assigned for a terminal to connect to a
network. The format is a quartet of 3-digit decimal number. (Example:
111.112.xxx.xxx)
Description
[ : Select item]
Not use
Cancel]
[ : Select item]
Off
Cancel]
[ : Select item]
Off
Cancel]
46
<Subnet mask>: For dividing the network, the subnet mask determines the range
of an IP address assigned to a terminal. (Example: 255.255.xxx.xxx)
<Gateway>: Gateway specifies a network device like a router when accessing a
server outside the network. It is identified by an IP address. (Example:
111.112.xxx.xxx)
[Email]
<Status notification>: Sends alarm information to the specified E-mail address
when an error such as lamp blowout occurs.
<SMTP server>: Set an IP address of the SMTP server.
<Port number>: Enter a port number of the SMTP server.
<Destination address>: Enter within 60 characters. (Example: xxx@xxx.xxx)
[PJLink]
<PJLink authentication>: Set whether or not to authenticate the user by password
when the projector is accessed via the PJLink-compliant Software Application. (Set
[On] or [Off].)
<Password>: Enter a password for confirmation when the above <PJLink
authentication> is set to [On].
Precautions
• When purchased, <PJLink authentication> is set to [Off] and <Password> is not
set by factory setting. You are recommended to make authentication setting as soon
as possible.
• If you forget a password, set it again.
Character entry
Enter characters using numeric keys of the remote control.
The character is entered with a beep sound if the beep sound is set to [On].
Character entry mode
Remote
Items using characters, numbers, and symbols
control
(e.g., projector name and destination address)
button
"1" "." "@" "-" "_"
"2" "A" "B" "C" "a" "b"
"3" "D" "E" "F" "d" "e"
"4" "G" "H" "I" "g" "h"
"5" "J" "K" "L" "j" "k"
"6" "M" "N" "O" "m" "n"
"7" "P" "Q" "R" "S" "p"
"8" "T" "U" "V" "t" "u"
"9" "W" "X" "Y" "Z" "w"
"0" "space!"#$%&'()*+,-./:;<=>?@[＼]^_`{｜}~"
Deletes one character.
47
Number only
"1"
"c" "2"
"f" "3"
"i" "4"
"l" "5"
"o" "6"
"q" "r" "s" "7"
"v" "8"
"x" "y" "z" "9"
"0"
Deletes one character.