Welcome to skywalk! Line Schematic Congratulations on the purchase of your new TONIC2 and thank you for your trust in us and in our products. In this manual you will find product-specific information that will help you quickly get to know your new paraglider to ensure your fun for a long time.
In the smallest size as well as in the extended weight ranges, the TONIC2 is classified as max. profile depth (cm) LTF/EN C due to its high wing load. In this area the TONIC2 is suitable for pilots with reg- Middle line length without risers (m)
FLYING WITH A MOTOR > the C-lines lead to the C-riser Currently, the TONIC2 has no certification for flying with a motor. You can find out the cur- A schematic drawing of the risers can be found at the back of the manual.
The airflow on top of the profile largely detaches and the paraglider de- The TONIC2 is certified to LTF II 91/09 and EN926-1, EN926-2 in the category B and C. scends without flying forward. Pulling hard on the B-risers allows you to decrease the area...
The TONIC2 will provide you with plenty of joy over many years if you treat it and care for it properly. Respect for the demands and dangers of our sport are essential for suc- cessful and beautiful flights.
TONIC2 13 RISERS 14 OVERVIEW GLIDER 500 mm 500 mm 405 mm 360 mm Trimspeed Trimspeed Accelerated flight 540 mm 540 mm 513 mm 420 mm 500 mm 1 Main lines 2 Top lines 360 mm 3 Bottom sail 4 Cell openings...
TONIC2 TEST PROTOCOL Date: Examinations of the lines: Firmness of main lines: Customer, Name: Results [+/–]: Description of failure: Suggested repairs: Adress: Phone: Visual check of trimming: Checkflight necessary? Type certificate patch? Glider: Size: Serial number: Identification plate? Type certificate number:...
Need help?
Do you have a question about the TONIC2 and is the answer not in the manual?
Questions and answers