Turning The Power On And Off - Toshiba TDP TDP-T9 Owner's Manual

Turning the power on and off

■ Connecting the power cord
1
Insert the power cord connector into
the AC IN socket of the projector.
2
Insert the power cord plug into a
wall or other power outlet.
■ Removing the lens cover
■ Turning the power on
1
Press the ON/STANDBY
button.
The power turns on the green indica-
tors light: Power. After a moment, the
start-up screen appears.
CAUTION
• Do not look into the lens while the lamp is on. The strong light from the lamp may cause dam-
age to your eyes or sight.
• Do not block the air intake or exhaust. Doing so could cause a fire due to internal overheating.
• Do not place your hands, face, or other objects near the air exhaust. Doing so could cause
burns, deform/break the object.
Notes
• The start-up screen will disappear after a moment. You can dismiss the start-up screen
before this by performing any operation. You can also configure the start-up screen not to
appear via the Display setting menu
• The first time you use the projector after purchase, after the start-up screen disappears,
the start menu is displayed
• When [Key lock] is [On], the operation buttons of the projector do not work
• When [Password] is [On], the start-up screen is displayed after the Password entry
screen disappears
Be sure to remove the lens cover when the power is
turned on. If it is left on, it could become deformed due
to heat.
p.34
p.27 .
.
p.30
Remote
Control panel Control
POWER
KEYSTONE +
KEYSTONE -
.
25
Power cord connector
(Supplied)
Start-up screen
p.30
.