Advertisement
Quick Links
Advertisement
Summary of Contents for Brickhouse Security B-Link Secure Cellular IP Camera Solution
- Page 1 B-Link Secure Cellular IP Camera Solution NetComm 4G Wireless User’s Guide...
- Page 3 B-Link Secure Cellular IP Camera Solution product page. In the Box: In the box you will find B-Link Secure Cellular IP Camera Solution NetComm 4G wireless router, 2 x Cellular antennas, 2 x WiFi antennas, 1 x 1.5m Black...
- Page 4 Device Overview...
- Page 6 Overview of LED indicators...
- Page 7 Power Supply Cable The included power supply cable has colour-coded breakout wires which can be terminated to provide power, ignition detection and input/output functionality. The picture below outlines the polarity and functions of the wires.
- Page 8 Installing your Device Attach the antennas. The B-Link Secure IP Camera Solution router is Step 1: shipped with caps on the Cellular, WiFi and GPS antenna sockets. To attach the supplied antennas, first remove the socket caps from the antenna sockets then screw the antennas onto the sockets by turning them in a clockwise direction.
- Page 9 Step 3: Access the router’s web interface. In your web browser’s address bar enter http://192.168.1.1/ or http://my.router/. The login page is displayed. There are two system management accounts (Root Manager and Admin) with different management capabilities. Root Manager account grants full privileges such as firmware upgrades, device configuration, backup and restore, and reset to factory default settings.
- Page 10 Step 4: Unlock the SIM card If the inserted SIM card is PIN locked, a pop-up window is displayed informing you that you must unlock the SIM before use. Click the OK button. The SIM Security page is displayed.
- Page 11 In the Current PIN field, enter the SIM PIN and then enter it again in the Confirm current PIN field. If you do not want to enter the PIN code each time the SIM is inserted, select the Remember PIN option. Click the Save button.
- Page 12 Installing your Device The The B-Link Secure IP Camera Solution Netcomm router can operate as both an access point and a WiFi client simultaneously, if required. By default the router has the Wireless LAN enabled and operates as an access point only.
- Page 13 Follow these steps to connect your client device to the Internet over the wireless network: 1. Turn on the wireless on your client device. 2. Open the wireless network manager on your client device and connect to the Wireless Network Name (SSID) printed on the Wireless security card. 3.
- Page 14 Connecting the router to another access point To use your router as a client, you must first change the wireless mode on the web user interface. To enable the wireless client: 1. From the top menu bar, select the Networking option. 2.
Need help?
Do you have a question about the B-Link Secure Cellular IP Camera Solution and is the answer not in the manual?
Questions and answers