Motor Specifications And Electrical Requirements - RIDGID AM22650 Owner's Manual

SP7007-1 Air Mover ESF 2017.qxp_SP7007 1/9/17 10:02 AM Page 3
• Do not run cord under carpeting. Do not
cover cord with throw rugs, runners,
or similar coverings. Do not route cord
under furniture or appliances. Arrange
cord away from traffic area and where it
will not be tripped over.
• Do not handle plug, switch, or the Air
Mover with wet hands.
• Observe the 8.9 Amp maximum outlet
rating when daisy-chaining units
together.
• Keep hair, loose clothing, fingers, and all
parts of body away from openings and
moving parts.
• Direct air discharge only at work area.
Do not direct air at bystanders.
• All disassembly and repairs should be
performed by qualified personnel.
• Do not operate any fan with a
damaged cord or plug. Discard fan or
return to an authorized service facility
for examination and/or repair.
cAutIoN:
• For dusty operations, wear dust mask.
• Do not move or carry Air Mover when
it is operating.
• Only operate on a level and stable
surface to prevent it from falling and
possibly causing injury or damage to
unit.
motor specifications and
electrical Requirements
This Air Mover is provided with a 3-speed,
120 volt, 60 Hz induction motor with a
grounding conductor.
protected and will automatically shut down
if over-heated. Once it cools, the motor
will restart automatically if not unplugged.
In the event of a malfunction or
breakdown, grounding provides a path of
least resistance for electric current to
reduce the risk of electric shock. This Air
sAve thIs mANuAl
It is thermally
Observe the following warnings that
appear on the motor housing of your
Air Mover:
WARNING
• to reduce the risk of electric shock,
connect only to a GfcI-protected
outlet.
• Do not expose to water or rain.
• this motor has an automatic
temperature shutoff device; it may
restart without notice. to reduce
the risk of injury, unplug before
servicing.
• Do not use an extension cord with
this blower.
• to reduce the risk of tip-over
during storage, do not stack more
than 3 high.
• Do not exceed 8.9 Amps through
receptacles.
Mover is equipped with an electric cord
having an equipment grounding conductor
and a grounding plug. The plug must be
plugged into a matching outlet that is
properly installed and grounded in
accordance with all local codes and
ordinances.
Do not modify the plug provided. If it will
not fit the outlet, have the proper outlet
installed by a qualified electrician.
3