NYMAS Nyma Pro GR-12/35 Series Installation And Operating Instructions

Installation and Operating Instructions
Installation and Operating Instructions
Round flange steel grab rail,
Plastic fluted grab rail
35mm diameter tube
Plastic Fluted Grab Rail 300mm
Round flange steel grab rail, 305mm
Plastic Fluted Grab Rail 450mm
Round flange steel grab rail, 455mm
Plastic Fluted Grab Rail 600mm
Round flange steel grab rail, 610mm
Plastic Fluted Grab Rail 900mm
Round flange steel grab rail, 750mm
Round flange steel grab rail, 915mm
Available colours: WHITE (WH), ELECTRIC BLUE (EB), DARK BLUE (DB), YELLOW (YE), RED (RD)
BLACK (BL), GREEN (GR), BROWN (BR), GREY (GR)
Colours: White (WH), Dark Blue (DB), Grey (GY), Dark Grey (DG)
Congratulations on the purchase of your grab rail. This grab rail has been designed for general domestic
Congratulations on the purchase of your grab rail. This grab rail has been designed to provide
indoor use to give users extra support while moving from one position to another. It provides support
users with extra support while moving from one position to another and assists with the
and assists with the independent standing and sitting of persons.
independent standing/sitting of persons.
Warnings:
Warnings:
• Due to manufacturing tolerances we do not
• Due to manufacturing tolerances we do not
recommend pre-drilling fixing holes before physically
recommend pre-drilling fixing holes before physically
receiving this product.
receiving this product.
• On receiving delivery of this product, a thorough • On receiving delivery of this product, a thorough
check must be carried out and any defects
check must be carried out and any defects
immediately reported. The product must be stored in
immediately reported. The product must be stored in
a dry place and not stacked under other equipment.
a dry place and not stacked under other equipment.
• The wall on which the rail is installed must be flat
• The wall on which the rail is installed must be flat
and capable of taking the load. An uneven substrate
and capable of taking the load.
surface or angle may cause anti-ligature design issues.
• Installation must be carried out by a qualified
• Installation must be carried out by a qualified
tradesman using suitable fixings for the wall
tradesman using suitable fixings for the wall
substrate. substrate.
• Improper installation / use can cause accidents and
• Improper installation / use can cause accidents and
injuries.
injuries.
• Do not over-tighten fixings
• Do not use countersunk fixings.
Rev PI_GR_XX_35_00
Rev 01
• Never alter the fixing holes as this could affect the
• The Max Rated Load of is 150kg (24 stone).
strength and integrity of the product.
• After installation a functional test must be carried out
• Do not over-tighten fixings.
prior to use.
• These instructions should be retained by the user of
• This rail has been tested with a static load of 160kg
the product for its whole life time.
giving a max rated load of 107kg
• Never alter the fixing holes as this could affect the
• After installation a functional test must be carried
strength and integrity of the product.
out prior to use.
• This product should not be subjected to impact.
• These instructions should be retained by the user of • This product is designed to offer support to the user
and should not be used in a way that would apply
the product for its whole life.
the users' full weight to the rail.
• This rail should not be subjected to impact.
• Do not use the grab rail for any purpose other than
• This rail is designed to offer support to the user and
that for which it was designed.
should not be used in a way that would apply the
• If in doubt, carry out your own risk assessment
users' full weight to the rail.
per installation / user to ensure risk(s) is/are at an
acceptable level.
• Do not use the grab rail for any purpose other than
that for which it was designed.
PFGB 12/XX
GR-12/35/XX
PFGB 18/XX
GR-18/35/XX
PFGB 24/XX
GR-24/35/XX
PFGB 36/XX
GR-30/35/XX
GR-36/35/XX