Installation Instructions - Farberware FCW10BSCWHA Instruction Manual

CONTROL PANEL
1 Power On/Off Button
2 Start/Pause Button
3 Program Selector Button (Normal, Heavy, Gentle, Rapid, Soak, Spin)
4 Water Level Selector Button (1-6)
5 Child Lock Function
To Activate: Press & Hold The Two Buttons (Water Level/Additional
Rinse) For 2 Seconds. To Deactivate, Do The Same.
6 Additional Rinse Selector Button

INSTALLATION INSTRUCTIONS

BEFORE USING WASHER
• Remove the exterior and interior packing
• You will need the following tools:
1. Wrench
2. Pliers
3. Screwdriver
• Check to be sure you have all of the following parts:
1. One inlet hose
2. One faucet adapter
3. One bottom base noise cover with two screws
4. One drain hose assembly with clamp
Remove shipping brace. NOTE: It should be saved and used (to prevent damage to
•
washer components) whenever washer is moved or transported to a new location.
• Clean the interior with lukewarm water using a soft cloth.
• Allow 2 inches of space between the back and sides of the appliance.
• DO NOT use excessively hot water (122 degrees F). Plastic
parts may be deformed or damaged.
8